What Did You Do with Your 80 This Weekend? (106 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
fj62max
Wildlife Customs
Speaking of Bowfin Racks...
I got the solar panel nestled down below the crossbar level so I can still use the full rack when needed. Next up is L-track runners down the sides for tie-down po
Speaking of Bowfin Racks...
I got the solar panel nestled down below the crossbar level so I can still use the full rack when needed. Next up is L-track runners down the sides for tie-down points.
Additionally - found out the rack runs through the auto carwash just fine. The operator looked at it for a bit, shrugged, and let it through. Worked out fine.
View attachment 1584432
Additionally - found out the rack runs through the auto carwash just fine. The operator looked at it for a bit, shrugged, and let it through. Worked out fine.
View attachment 1584432
Which solar panel did you use? Can you take pics of your setup
Did the Landtank Seat Bracket install a couple of weekends ago.
Made a video on the install.
I love the work and quality of the landtank bracket, but the stock ,heavy leather seats are barely worth all that work.
If I had the choice again I would go with installing better seats from a range rover or something.
But I am very happy with the leg room. The back rest does lean back a little bit, not too bad. Sometimes I like to sit straight up. but most of the time I do lean back a little anyways so its not too bad. Just that now, I can't get the back rest up if I feel like sitting straight up.
I kind of made up for it by using the lumbar support all the way forward.
Here's the clip:
Made a video on the install.
I love the work and quality of the landtank bracket, but the stock ,heavy leather seats are barely worth all that work.
If I had the choice again I would go with installing better seats from a range rover or something.
But I am very happy with the leg room. The back rest does lean back a little bit, not too bad. Sometimes I like to sit straight up. but most of the time I do lean back a little anyways so its not too bad. Just that now, I can't get the back rest up if I feel like sitting straight up.
I kind of made up for it by using the lumbar support all the way forward.
Here's the clip:
LFD2037
TEXAS LEXUS!
Most frustrating part change of my life! Such a simple procedure that's such a PITA.
I’m not sure about this? Is this like getting a brazilian wax? Looks good but is it supposed to? Hey, I’m not knockin’ It...Sorry, I’m out of touch.
Zona
Have you replaced the VSV with the upper plenum still attached?
cc93cruiser
CRUZAHEAD
Took the neglected cruisers out today.. been having too much fun with the 200 we got a couple months back, these poor rigs just been sitting.. Picnic with the fam full of lead...
Last edited:
SteelHunterFJ80
SILVER Star
What paint are you using? It looks great!
SteelHunterFJ80
SILVER Star
I gotta do the same thing to my white cruiser. Turns out a couple doors have been repainted with what looks like no clear coat.
What are you doing with your paint? Can you describe the process and purpose?
Last edited:
https://forum.ih8mud.com/attachment...0/?temp_hash=b33033f90991635d64a67d63f1ff8e9f
first time on the beach !
first time on the beach !
I went with my wife to the hill above the sea
It was a winter day
I made traditional Israeli "MUD" coffee
It was a winter day
I made traditional Israeli "MUD" coffee
LFD2037
TEXAS LEXUS!
No but I wouldn't attempt to, either. I've replaced the hoses on it but if I had to replace the actual VSV I'd save myself the tedious headache and just remove the plenum. And if I removed the plenum I'd replace that damn fuel filter again and relocate the VSV for future endeavors!
fj62max
Wildlife Customs
Thanks. On the body i used bedliner Rust-Oleum and on the frame i used John Deere black.
Over the past few weekends I:
Moved from the SF Bay to NE Ohio - couldn’t be happier to be home.
Stuffed my fusible link with dialectric grease and solved my low idle issue. Now for the knock sensor code...
Also found that I’m getting 9.6mpg (limp mode mpg?) so I bought a 48.7mpg daily:
Moved from the SF Bay to NE Ohio - couldn’t be happier to be home.
Stuffed my fusible link with dialectric grease and solved my low idle issue. Now for the knock sensor code...
Also found that I’m getting 9.6mpg (limp mode mpg?) so I bought a 48.7mpg daily:
The white 80's ar single stage paint originally, no clear
LS1FJ40
SILVER Star
80s with white paint should be single stage paint with no clear coat. That is one of the perks of white paint...
LS1FJ40
SILVER Star
Nice timing Pat! haha
Picked up a steering wheel cover and sewed it on. Took about 3.5 hours.
Put the magnaflow cat on. More clearance and prepping for sliders. The other cat will be removed and exhaust ran over the frame.
