What did you do to your pig today?
- Thread starter ABQIRONPIG
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Today I took all the floor mats out and cleaned it all up from all the dirt I picked up at Cruise Moab. I also wired up a dual battery system, relocated my washer fluid tank and finished fixing my rear window so it would roll up and down.
Great day!
Great day!
ran out of fuel today,,,, but its all good.
PabloCruise
SILVER Star
Does your washer work?
I believe it does! I am pretty sure that it is not the stock unit though. I actually haven't put fluid in it yet to try it. I have to re-wire it now that I have relocated it.
PabloCruise
SILVER Star
CruiserMoose said:
Let me know how it goes. My stocker does not work :-(
Make sure you have a good ground at the dash switch. There's actually a tab on the switch where you can add a ground.
Last edited:
PabloCruise
SILVER Star
Suddenly having deja vu! It was you that advised me of this!
I think I looked at how much fun it was going to be to pull the center panel and procrastinated...
Thanks Ming!
(FYI, me llamo no es Carlos)
pig looks happy on 38s
and all this after digging the rusty metal out of my eye....
PabloCruise
SILVER Star
nuclearlemon said:
Ouch! What happened?
cutting the exhaust out of the 8 so i can slap new cats in and hopefully pass emissions
PabloCruise
SILVER Star
nuclearlemon said:cutting the exhaust out of the 8 so i can slap new cats in and hopefully pass emissions
Oh no, the 80 is not passing? :-(
I need to test the Civic this year, should be fine.
Glad I got collector plates on the 40 & 55 when I did.
What brand cats are you getting for 80?
everything but nox was good. allowed 4.0, ran 4.7. tested cats and there was only a 20 degree difference between in and out. couple of cheap magnaflows
nuclearlemon said:
Did you have to wait long at the testing station. I usually ran about 2000 rpm for a good minute before they plugged in the sniffer to get the cats firing well. Nox can be a function of the egr too. Ever get that working again?
Fortunately our felonious former gov got rid of testing for pre obd2.
yep, egr works good. "idled" at 2800 while waiting, only about a 10 min wait, i got there almost first thing. cats tested bad when i put the heat gun on them when i got home.
