Unobtainium (2 Viewers)

[cruiserdan]

Yup. We have a 75 FST and the carrier is on the right. the hook gizmo on the sill is unique however because it is relieved to clear the drop-down tail gate hinge.

 

[Living in the Past]

Yup. We have a 75 FST and the carrier is on the right. the hook gizmo on the sill is unique however because it is relieved to clear the drop-down tail gate hinge.

It is interesting only finding two part` numbers for the hooks. My guess is the one that ends in 10 is the one used 3/69-8/76 on spare tires on the left. RHD were always on the left. The one that ends in 20 were used on the LHD with tailgate or barn doors up until 9/75 when tailgate and barn doors even LHD were moved to the left side. Would be curious to see the hook on your 75 FST. Here is my 73 FST and the hook just clears the right hinge. I know this style hinge was replaced by another style but don't find a hinge change until 1/79.

 

[cruiserdan]

Ours is in off-site storage at the moment. We are planning on bringing it back onto the building in the near future. At one point I photographed the catch but I can't locate it right now. This one is an unmolested 48,000 mile truck.

 

[ToyotaMatt]

Ahhhhhhhhhhhhhhhhhhhhhhh. " NOS 90919-02015 's "

 

[tahoe40/45]

Do those coils work on pre 69 Cruisers?

 

[Racer65]

The world's first...electric power steering for the pig! Much thanks to Classic Cruisers for the collaboration and test install.

 

[Bas Zuidberg]

The world's first...electric power steering for the pig! Much thanks to Classic Cruisers for the collaboration and test install.

View attachment 1919160View attachment 1919161View attachment 1919162

Not to difficult to install with the manuals that come with the unit. Great piece of kit and completely reversible - ideal for the puritans in the house! I have the manual on pdf if anyone is interested

 

[ToyotaMatt]

84322-60021

NOS Switch Assy, Hazard Warning Signal

HAZARD Pull Switch

[ 09.1977 - 10.1984 ] BJ40,FJ4#,55

​

 

[ToyotaMatt]

note: knobs fully restored by me ,. by hand the traditional Toyota way , with care and concern attn. to period correct details

 

[ToyotaMatt]

 

[old87yota]

Great job RAGINGMATT!

 

[ToyotaMatt]

90176-08004

Early F engine

Valve Cover Acorn Nuts

Grommet Seals Kit

​

 

[ToyotaMatt]

 

[red66toy]

Nice

View attachment 1929027View attachment 1929028View attachment 1929029View attachment 1929030

Nice work.
For anyone wanting to know what year f engines there were spec for: Correct Valve Cover Nut's for F135/145/155?
Acorns started sometime around 1968.

 

[wngrog]

The world's first...electric power steering for the pig! Much thanks to Classic Cruisers for the collaboration and test install.

View attachment 1919160View attachment 1919161View attachment 1919162

Brilliant

 

[ToyotaMatt]

Reproduction radiator drain tube w/ removable petcock

Correct J.I.S. thread pitch & diameter

96431-03873 / 96431-53873

 

[kcisland]

removable petcock

Reproduction radiator drain tube w/ removable petcock
Correct J.I.S. thread pitch & diameter
96431-03873 / 96431-538
View attachment 1937688

96431-03873 / 96431-53873
Just picked one of these beauties up from RAGINMATT and it is in transit now. It will probably be the prettiest part of my whole vehicle...


View attachment 1937688

 

[mmcinnis]

View attachment 1929027View attachment 1929028View attachment 1929029View attachment 1929030

Do you need the s/s flat washer to space them? Looks good Mike

 

[Ken White]

Rear HJ47 brake backing plates.

 

[ToyotaMatt]

Do you need the s/s flat washer to space them? Looks good Mike

no , these do not require a flat washer to space them ,

providing u use the correct , and New condition Grommets 90210-08010