Ultimate OEM 4X SERIES PARTS IN STOCK (6 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Glow Plug Current Sensor for Super Glow 2H diesels. 28631-68020, courtesy of Amayama.

image.jpg
 
where would be a good start to find the Air conditioner compressor mount and engine mount to suit a RHD 2F FJ40 ?
Thanks in advance.
 
where would be a good start to find the Air conditioner compressor mount and engine mount to suit a RHD 2F FJ40 ?
Thanks in advance.

- contact " long time storage " parts specialist @FJ40GURU
 
where would be a good start to find the Air conditioner compressor mount and engine mount to suit a RHD 2F FJ40 ?
Thanks in advance.

Is a different part number listed for the rhd bracket than the left? I ask because I have an NOS bracket which is much more compact than the FJ60 cradle. I assume it’s an FJ40 bracket.
 
Is a different part number listed for the rhd bracket than the left? I ask because I have an NOS bracket which is much more compact than the FJ60 cradle. I assume it’s an FJ40 bracket.
Of course. They’re different to LHD.
 
Of course. They’re different to LHD.

This does not follow. The transfer case output is still offset to the right side, and the engine is still offset to the left. The mounts should be the same.
 
This does not follow. The transfer case output is still offset to the right side, and the engine is still offset to the left. The mounts should be the same.
This is incorporated with engine and power steering bracket in RHD models. Is LHD the same?
 
This is incorporated with engine and power steering bracket in RHD models. Is LHD the same?

Incorporated into the lower mount on the right hand side.
 
Rubber plugs for the slots on the drum brake backing plates. Just checked this morning, still available.

There are different styles, I think to differentiate between the brake spoon adjusting hole and the opposite end "dummy" hole.

The plug for the adjuster hole is nice, because it has a recess to easily pry out with the brake spoon.
Drum  backing plate plugs.jpg
 
Does anyone know if the black plastic rivets that hold the black wiper access covers on the inside of the windshield frame are still available? It’s an ‘82 40. If so, what’s the current PN? thanks
 
@billmc

Does anyone know if the black plastic rivets that hold the black wiper access covers on the inside of the windshield frame are still available? It’s an ‘82 40. If so, what’s the current PN? thanks
Are these access covers also serving as defroster nozzle guides?
 
These two pieces, each takes 4 plastic rivets. Can you believe there was a mouse nest it there! lol
8AA0FA12-F0C2-43FF-9E9A-5523459F3502.jpeg
 
Does anyone know if the black plastic rivets that hold the black wiper access covers on the inside of the windshield frame are still available? It’s an ‘82 40. If so, what’s the current PN? thanks

You can still order these. You need 8, but I ordered a couple extra to have on hand.

90467-07003
Clip(For Defroster Guide)
[08.1980 - 10.1984] BJ42,FJ40

Screen Shot 2020-02-19 at 8.43.50 AM.png
 
You can still order these. You need 8, but I ordered a couple extra to have on hand.

90467-07003
Clip(For Defroster Guide)
[08.1980 - 10.1984] BJ42,FJ40

View attachment 2215428
Thanks, That’s great! I’ll order 16 just in case I need to pull them off again.
 

Users who are viewing this thread

Back
Top Bottom