Builds Trail Tailor- Custom Armor Build plus a few things (1 Viewer)

[TRAIL TAILOR]

I need one for '14 200 series just to verify, thx

In stock... Maybe refresh your browser

 

[kcjaz]

@mmcinnis. Steel lower base with aluminum arms. Cut and trimmed for a 35-37" tire and triple Jerry cans or this TOYOTA cooler.

J



View attachment 2756386

That cooler is made for the 4Runner right? The only ones I've seen say 4Runner on the top and the pic sort of looks like it might say 4Runner on top. A Land Cruiser version of that would be cool. Does it exist?

 

[Firemedic831]

That cooler is made for the 4Runner right? The only ones I've seen say 4Runner on the top and the pic sort of looks like it might say 4Runner on top. A Land Cruiser version of that would be cool. Does it exist?

Yes it says 4 runner

 

[JetFuel]

@mmcinnis. Steel lower base with aluminum arms. Cut and trimmed for a 35-37" tire and triple Jerry cans or this TOYOTA cooler.

J


View attachment 2756385View attachment 2756386View attachment 2756387View attachment 2756388View attachment 2756389

This looks fantastic. Approximate weight of the bumper and swingouts?

 

[blaise]

Will you do another LX 570 HWM run or would this work? 200 Series Hidden Winch Mount - https://www.trail-tailor.com/store/p164/Hidden_Winch_Mount_-_200_Series.html

 

[TRAIL TAILOR]

@indycole brought his 200 up to mod the front slightly and up the ComeUp winch size to the Seal Gen 12.5rs. I'll be building a new rear bumper with a couple custom mods with a higher panel rear for more protection. Built these bumpers a few years back and now building to truly suit/fit his needs.

Jason

 

[TRAIL TAILOR]

@mmcinnis 200 bumper is done and gone. A few other things while it was here..


Bumper-- steel base with aluminum arms and attachements
RLCAs
RLCA skids
New tail lights
New trailer harness (tucked up high and tight)

J

 

[TRAIL TAILOR]

@CharlieS asked.... and yes, I'm working on a new RLCA skid. @indycole will be the fit up rig.

Hopefully in the next week I will have something to show.

Jason

 

[Firemedic831]

@mmcinnis 200 bumper is done and gone. A few other things while it was here..


Bumper-- steel base with aluminum arms and attachements
RLCAs
RLCA skids
New tail lights
New trailer harness (tucked up high and tight)

J

View attachment 2848331View attachment 2848332

Really Looked Great. happy to have meet you

 

[TRAIL TAILOR]

Finalized the new RLCA skid version today on @indycole rig. Full wrap. Cole has one of the heaviest 200s out there and here are my old ones I took off today compared to the new version for comparison.

Jason

 

[TRAIL TAILOR]

Should have the rear panhard relo bracket finished up tomorrow as well.

Multi- position, bolt and weld on installation.

J

 

[TRAIL TAILOR]

Skids are available on the website now.

Get them while you can.

J

200 Series Rear Lower Control Arm Skids

Toyota Land Cruiser 200 Series Rear Lower Control Arm Skids Made from 3/16" HSLA steel Laser cut and CNC bent for accuracy Works with OEM bars and up to 2.5" Johnny Joint ends Kit includes the following: (1) Set (right and left) skids - bare metal (4) 5/16" x 1" Type F self tapping bolts (1)...

www.trail-tailor.com

 

[nwfl4runner]

Ordered - thank you sir!

 

[USMCVader]

Ordered. Thank you for all you do for the LC community!

 

[TRAIL TAILOR]

RLCA Skids---

All orders shipped!

I had an over-run of 5 sets. They will hit the website once I know everyone received theirs.

Jason

 

[TRAIL TAILOR]

Another Pre-16 bumper install (missing the fairlead- will have that installed in a few days)

Trail Tailor sliders as well.

J

 

[TRAIL TAILOR]

Rear in the works.

J

 

[ZRTactical]

Another Pre-16 bumper install (missing the fairlead- will have that installed in a few days)

J

View attachment 2870709View attachment 2870710View attachment 2870711

I need this exact bumper! Are you still taking orders?

 

[teejnut]

Rear in the works.

J

View attachment 2870725View attachment 2870727View attachment 2870728

Going to be selling these? If yes, will it be compatible with the LX's?

 

[Tex68w]

Well time to make our own adjustable panhard bars. Tired of quality issues, outrageous shipping from Japan and Australia, and extended "mfg lead times" due to Covid....

So, I'm spinning parts to make up my own. Machined, fabricated, coated and assembled in the USA.

For the following series/models:

100, 200, 80/105, GX460, GX470, 4Runner and FJ Cruiser

OEM Toyota rubber bushes, turnbuckle adjustment for on vehicle adjustment, CNC milled and lathed components. Made from 1.25" solid bar, Zinc plated turnbuckle coupler, Grade 8 nuts and washers. Powercoat finish.

I'll also be releasing our panhard relo kit at that time too for the models listed above as well.

Should see production releases by the end of January.

Jason

View attachment 2873984

Well I am definitely going to need one of these for the 200. Let us know if you do a preorder.