Terrain Tamer parabolics installed (1 Viewer)

[BullHab]

Look at actual diameters- BFG are pretty small 33s. An extra 3/4” might be noticeable.

That's what she daid... sorry , just couldn't resist. My current General 285/75 16 are supposed to be 32.8 inches. Measured at 32psi and 1k miles actually a 32 inch tire.

 

[BullHab]

The pin through the springs is just a locator for the spring to the acle perch and u bolt plate. You just add another hole to the perch and the plate and this offsets the spring relative to the axle. So if you drill a hole in each 1” toward the front of your 40, the pin will now be in this hole and the axle is 1” back from where it would be if the pin was lined up with the center hole. Wish I had a picture definitely worth 1000 words in this case.

I really need a picture as the image i get with the new holes moves the avel forward not back to center it. I'm interested as my 40 is also getting a TT kit and currently the are seems too close to the forward position.thank you.

 

[Jdc1]

That's what she daid... sorry , just couldn't resist. My current General 285/75 16 are supposed to be 32.8 inches. Measured at 32psi and 1k miles actually a 32 inch tire.

Definitely sucks when overpromised lol.