My LX came with 2 missing, one torn and the other stained.
A little diy project that takes longer to take the door panels off than to do the replacement..
Supplies:
Speaker Grille Cloth
Scissors
Razor
Adhesive
1) Remove door panel
2) Unscrew speaker grille
3) Measure and cut cloth oversize
4) Spray Adhesive on REAR only. The factory Adhesive will leave a stain to go by
5) Align cloth noting orientation to panel. This just makes a cleaner more detail oriented install
6 ) Pull cloth tight and roll over edge while pressing into the glue to anchor.
7) Let glue set up for a few minutes then trim with Razor
8) Reinstall grille cover onto door panel and reinstall door panel
9) Enjoy the refresh!
A little diy project that takes longer to take the door panels off than to do the replacement..
Supplies:
Speaker Grille Cloth
Scissors
Razor
Adhesive
1) Remove door panel
2) Unscrew speaker grille
3) Measure and cut cloth oversize
4) Spray Adhesive on REAR only. The factory Adhesive will leave a stain to go by
5) Align cloth noting orientation to panel. This just makes a cleaner more detail oriented install
6 ) Pull cloth tight and roll over edge while pressing into the glue to anchor.
7) Let glue set up for a few minutes then trim with Razor
8) Reinstall grille cover onto door panel and reinstall door panel
9) Enjoy the refresh!