Source for Aisin/ASCO hub BB?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

PabloCruise

PabloCruise

SILVER Star
Joined
Jun 3, 2004
Threads
504
Messages
26,127
Location
Northern Colorado
:mad:

I was trying to throw a set of Aisins on my 40 this weekend.

I thought I would be all detail oriented and clean the hubs up. So I took the dial apart, cleaned it and tried to put it back together and the F**cking BB went shooting across the garage. :mad:

I imagine some supplier of odd parts caries these. Does anyone know, or has anyone found a source?

Thanks,
 
Last edited:
A ball bearing would probably work. You can buy them at www.mcmaster.com, but you have to buy like 100 of them--and you only need one. Bring the one from your other hub down to your local bike shop and see if they have something similar in size.
 
2mbb said:
A ball bearing would probably work. You can buy them at www.mcmaster.com, but you have to buy like 100 of them--and you only need one. Bring the one from your other hub down to your local bike shop and see if they have something similar in size.
Click to expand...

x2 any competent bike shop should have what you need for $.25
 
And if all else fails, see if these guys have what you need. OK, you'll need to by 100, but at $3 who cares.
http://www.loosescrews.com/
 
I had this same problem last week and posted about it as well. I am heading on Wednesday to a bearing and spring supply store (a small but reputable outfit near my house). I am hoping that they can help me ID the bearing and spring such that I can replace them easily....rather than going through the dealer or winging it...
 
I called the bearing shop this afternoon. He said he'll have no problem sourcing an exact match. I'll post the results when I have them.
 
Another options would be to go to a boneyard and pull just the cover off a hub. All AISIN hubs through the Tacoma use the same cover.
 
PabloCruise said:
Thanks man - I called the local hobby shop, they need a manufacturer, and preferably a P/N.

Can you recall these tidbits?

Thanks man!
Click to expand...

Tell them you need a 2 speed maintenance kit for an API RS4. The part number of the kit I bougth at a local hobby store in 2/05 is a #49442587088882 for $5.00

The kit is going to have a bunch of other stuff in it you won't recognize/need but has the spring and detent ball that worked well for me. Several of the other suggestions are good ones too. Good luck.

http://www.hpiracing.com/kits/mt/mt-m.htm
 
Last edited:
wesintl said:
your garage floor... :lol:
Click to expand...
x2 you need one of these
150213_lg.gif
 
Alright!

I found some of these BB's! I'll be putting my hubs together tonight!!!

I can send 5 freebies out to the first 5 PM's (limit 1 each), don't forget to include your address.

After those 5 are gone, I'll take a $2 paypal to cover costs. PM me for details
 
You must log in or register to reply here.

Similar threads

C
Source for Stock FJ40 Leaf Springs
Replies
14
Views
2K
cvan1971man
C
B
Aisin Carb Part ID
Replies
8
Views
1K
65swb45
65swb45
TheBussman
f/2f oversized bearings for undersized camshaft source?
Replies
3
Views
987
bryce112
bryce112
kreativecid
Seeking online source FJ40 wheels white
Replies
13
Views
1K
3_puppies
3

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom