SAS SAS #9 Official Page 08/04/25- 08/08/25 (34 Viewers)

[RevISK]

the burden isn't the work. The burden is not living up to or exceeding the previous year.

This is why one should strive for mediocrity.

 

[thatcabledude]

We need to get mustard back out front. We’ve already had green flags twice!

 

[sogncab]

This is why one should strive for mediocrity.

My normal rule is set expectations low and constantly fail to achieve them.

 

[mesa man]

We need to get mustard back out front. We’ve already had green flags twice!

View attachment 3830512

Okay, I guess this hotdog will vote for some mustard! Since you asked nicely!

 

[Broski]

Darn it. Just tried to register, says it is full. I will be wait list.

I see your now registered

 

[Tank5]

I’ll be there.

 

[Broski]

How is your tablet mounted? I see counduit coming up from the console does that hide the mount or is it attached to the dash?

Yes to both, it’s a Ram mount 1/2” solid aluminum rod that you bend to fit with a brace into the ash tray that I made. Then covered with split loom.
The ash tray is still fully functional, although I’ve never used it.
It’s funny I have no issues modifying the body but I can’t get myself to mount anything to the dash or put screws into it.
It still perfect with no cracks

 

[Tank5]

Yes to both, it’s a Ram mount 1/2” solid aluminum rod that you bend to fit with a brace into the ash tray that I made. Then covered with split loom.
The ash tray is still fully functional, although I’ve never used it.
It’s funny I have no issues modifying the body but I can’t get myself to mount anything to the dash or put screws into it.
It still perfect with no cracks

I understand I want the interior to look as stock as possible. I am not interested in glueing things to the dash or adding extra holes. I am always looking at what others have done that seem non invasive.

 

[sogncab]

Start panicking. 177 days until SAS9

 

[DrRock]

Start panicking. 177 days until SAS9

My garage is a sea of boxes containing brake parts, farkles etc. got my @CruiserTrash fire extinguisher bracket installed, thanks Jim, fits my ‘85 perfect and holds down the matt too

 

[sogncab]

My garage is a sea of boxes containing brake parts, farkles etc. got my @CruiserTrash fire extinguisher bracket installed, thanks Jim, fits my ‘85 perfect and holds down the matt too

View attachment 3834321

Trade ya....

 

[JohnnyFish]

Start panicking. 177 days until SAS9

No worries. I fabricated a transfer case shifter bracket today. Plenty of time. : /

 

[CruiserTrash]

My garage is a sea of boxes containing brake parts, farkles etc. got my @CruiserTrash fire extinguisher bracket installed, thanks Jim, fits my ‘85 perfect and holds down the matt too

View attachment 3834321

I should state this in the instructions, but it works better when actually attach a fire extinguisher to it!

Just kidding! Thanks for the order!

 

[DrRock]

Trade ya....

View attachment 3834414

I’d be fine with the work you have ahead of you if I could have what looks like a nice heated workshop that you have

 

[DrRock]

I should state this in the instructions, but it works better when actually attach a fire extinguisher to it!

Just kidding! Thanks for the order!

Just posted a photo in your other thread with the extinguisher installed. Found a Halon extinguisher at my Dads place inspected and ready to go, wohoo..

 

[sogncab]

I’d be fine with the work you have ahead of you if I could have what looks like a nice heated workshop that you have

That's not my shop. That's Proffitts shop.

 

[DangerNoodle]

That's not my shop. That's Proffitts shop.

bob shop

 

[sogncab]

bob shop

I have been corrected.

 

[Mike Shull]

Start panicking. 177 days until SAS9

This worked. Now I’m in shock and I can’t find direction.

 

[sogncab]

This worked. Now I’m in shock and I can’t find direction.

View attachment 3835024

If it makes you feel better, I start panicking when we're loading up to go home the previous year.