Pretty quiet in here... what are you working on? (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

GX470 rear door gas strut mod.
0409D4F0-C201-42FD-A3FB-3C12AC52FB2F.webp


64C663DF-8408-4723-ABAF-3EA98189A883.webp

5B39E93B-F4E4-4A92-93FF-526A5A8B8441.webp



B1985937-40EA-495D-8A09-12CC9DBAE37F.webp

C5E7ED80-EC27-4C22-BBCC-A7DF69E9A735.webp
 
Hi all! I’m new to the group and just got me ‘79 LC FJ43. I’m working on a new alternator and just saw that the previous owner modified the bracketing, cut the wire harnesses and re-wired to make it work. 🙄
 
Installed some proper recovery points... rear and front (front has 2 recovery points only one is shown) Also extended the rear diff breather to behind the gas door area

original_0004cb5a-59ce-4841-ac21-396ae679ed2f_PXL_20210123_224748741.webp
original_972ac584-4ceb-43f6-8900-0038d9fd83c2_PXL_20210123_210422841.webp
 
I have been thinking about this mod as well just not sure how it will be in a tight parking area... I will have to inspect yours to see!
So far so good! It’s only been a day so hopefully the strut will last a long time. Got tired of the door not staying open when it supposed to! I think guiding the door open and close should keep it in good working order.
 
Pretty good episode of Matt’s Off-road Recovery of an 80 series rolling over and still driving out.

 
Man, you got some kinda LC addiction! 😂
 
I’m in Santa Fe, NM this weekend and there’s quite a few nice LC’s on the streets. A 2020 Heritage Edition, a mid 80’s 60, a funked out diesel Defender, and some cool metal art.

BA9FACC3-30D8-4279-B298-EDFA02857BEF.webp


B7F3F62D-97DB-4022-B16D-B5237913D5FB.webp


EBD9A329-1CDE-4FEB-BE83-CD856F83018B.webp


7DA1D0CE-710A-47F7-8A57-32790067EF49.webp


98CAAF20-7BC6-44DE-92B9-83C26A8463C5.webp
 
Early 90's s-10 blazer. This and the stock fuel pump module for tbi to match the engine (tbi 350) The later ones work on higher pressure.
 

Users who are viewing this thread

Back
Top Bottom