alk747triodad
SILVER Star
Is this still available. Would like to put on Logan's 80.
Official ONSC member buying/selling thread (29 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The mounts are available, but the lightbar is gone.
alk747triodad
SILVER Star
^^ Thanks but wanted it all.
I'm selling the mini truck to fund some other projects. Its a really cool truck and a lot of fun, but I need some extra funds and don't really need 9 vehicles... I guess
forum.ih8mud.com
SOLD - NC: 1992 Toyota pickup up. $6000
4wd, 5sp 3.0 v6. It’s the base model with crank windows, it has a Coastal Off Road front bumper, FJ cruiser 17” steel wheels with 255/75/17 BFG KM tires in very good condition. It has some scratches and small dings but overall a very clean truck rust wise. The PO replaced the heads and radiator...
forum.ih8mud.com
9? I have 6. You have 2 going on 3 drivers in your family. You should have at least 12 vehicles.I'm selling the mini truck to fund some other projects. Its a really cool truck and a lot of fun, but I need some extra funds and don't really need 9 vehicles... I guess
SOLD - NC: 1992 Toyota pickup up. $6000
4wd, 5sp 3.0 v6. It’s the base model with crank windows, it has a Coastal Off Road front bumper, FJ cruiser 17” steel wheels with 255/75/17 BFG KM tires in very good condition. It has some scratches and small dings but overall a very clean truck rust wise. The PO replaced the heads and radiator...
Ghostrider I
I wear many "heads" as I have many vehicles.
Oh, did I mention it's TRIPLE LOCKED?!?!
I'd like to get $10K for it.
No affiliation, but this LX470 just popped up for sale about a mile from my shop. So if anyone wants, I can get a closer look. It’s pretty clean. Interior looks good, but the steering rack is leaking, as well as the passenger side CV. No navigation, 269k. Oh, and there’s no area code on the phone number, so I’d assume it’s 864.
That's about 259,999 from new lol
As I was walking away, I actually said, “it should say ‘like’ new.” With air quotes and all.
SFROMAN
SILVER Star
long shot but does anybody have an 80 series full float rear axle rebuild kit - bearings and seals?
I need to rebuild my rear 80 axle because today we noticed that my bearings look like they have overheated in the past and want to replace them tomorrow (Sunday) while everything is apart.
I am hoping someone has bearings and seals on hand that I can buy them from and or I can order you a new set and have them delivered to you. Ideally in Raleigh but willing to travel a bit.
I need to rebuild my rear 80 axle because today we noticed that my bearings look like they have overheated in the past and want to replace them tomorrow (Sunday) while everything is apart.
I am hoping someone has bearings and seals on hand that I can buy them from and or I can order you a new set and have them delivered to you. Ideally in Raleigh but willing to travel a bit.
I could not find the other for sale thread.
A friend of mine in TX has another JDM Turbo Diesel 80 for sale.
bringatrailer.com
Please remove if need be.
A friend of mine in TX has another JDM Turbo Diesel 80 for sale.
1993 Toyota Land Cruiser VX HDJ81 5-Speed
Bid for the chance to own a 1993 Toyota Land Cruiser VX HDJ81 5-Speed at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #54,658.
bringatrailer.com
Please remove if need be.
ISO Rollbar pads for the FJ40
Malleus
Far west of Siegen
Del, did you find the kit? I have a full set that has been sitting on the shelf for months, waiting on the bearing locknut wrench from OTC. The last time I did the job, I sued a punch instead of the wrench, and I didn't like the result. I had to set the preload twice.
Fred - I have the Wit's End (I think it's from WE) 54mm that also has the rear axle tool built into it. Let me know if you need it. I need to get you those schematics from Shane anyway.
SFROMAN
SILVER Star
Thanks.
luckily Adam had what we needed on the shelf and I have already ordered a few axle rebuild kits to replace his parts and to have some on my shelf.
appreciate the offer.
Malleus
Far west of Siegen
John, this is what I need, is this what yours looks like?
The story I get is that OTC moved their warehouse this summer and can't find anything, so the tool suppliers are selling inventory they don't have and can't get.
What pisses me off most is that I started looking for this in April. The best price I could find was from Australia, but had 8 week delivery. I've had two suppliers cancel orders for it and I'm cancelling a third this evening. If I had ordered it from AU when I started the job, it would have been done three months ago.
NCFJ
Supporting Vendor
If you have a 54mm socket for front axle work just put notches in it for the studs on the rear. Works just fine
Found this on the interwebs
Found this on the interwebs
Malleus
Far west of Siegen
Wait, mine or his?
That's the same model tool I have (the one in the picture from Stan). Worked just fine on my 94 rear a couple years ago.
