1MOA
SILVER Star
For you I can make a deal.
Official For Sale/Trade/WTB/Free Thread (5 Viewers)
- Thread starter Devilmans Hand
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
CrabCake
SILVER Star
Ok, I think I'm finally ready to sell my Front Runner rack and ARB awning for the 80. I love both of them, but after over a year of ownership of my rig, I just don't see myself using them for what they are worth. Both were on my truck from the P.O., and he really spared little expense with the goods, which he used to their full function. I may kick myself if I sell and don't have for Fall Crawl (mainly for the awning), but that's how it goes if I want to move forward. If I had a place to store the rack without being completely in my way all the time, I'd probably keep the setup as it is really solid. That said, the cash would go to good use for suspension upgrades on mine while making my wife happy for not always tapping the bank account for my toy stuff.
I'll list here first for the local group, if I don't have any interest, I'll post to a larger audience in a week or so...
New, the Front Runner is going for $1,650 and the ARB awning about $350, so it's a $2k combo retail. Condition is very good on both with just a few scrapes on the rack and a minor scrape on the awning cover, but otherwise excellent. Asking $950.00 for the combo setup and would prefer to sell the awning first if I split up. If I sell the awning alone, I'd say $200 with the Front Runner brackets or $175 without the brackets.
Size on this one is 56" wide by 85" long and sits about 2" above the roofline. I still have the factory center strips, but I think you'd need to remove the side rails for clearance. The ARB awning has the Front Runner brackets, so it mounts really solidly on it and is close to the full length of the rack. I forgot to measure the pull out, but it looks about the same as the length or a little longer.
As of now, I'm running the 315's and about 3.5"-3.75" of lift and can still fit into my standard garage by about an inch....I'm happy to leave on the truck and meet somewhere reasonable within an hour or so of Annapolis to swap right over to your rig, or meet at my house in Annapolis.
And the goods....thanks for looking!
I'll list here first for the local group, if I don't have any interest, I'll post to a larger audience in a week or so...
New, the Front Runner is going for $1,650 and the ARB awning about $350, so it's a $2k combo retail. Condition is very good on both with just a few scrapes on the rack and a minor scrape on the awning cover, but otherwise excellent. Asking $950.00 for the combo setup and would prefer to sell the awning first if I split up. If I sell the awning alone, I'd say $200 with the Front Runner brackets or $175 without the brackets.
Size on this one is 56" wide by 85" long and sits about 2" above the roofline. I still have the factory center strips, but I think you'd need to remove the side rails for clearance. The ARB awning has the Front Runner brackets, so it mounts really solidly on it and is close to the full length of the rack. I forgot to measure the pull out, but it looks about the same as the length or a little longer.
As of now, I'm running the 315's and about 3.5"-3.75" of lift and can still fit into my standard garage by about an inch....I'm happy to leave on the truck and meet somewhere reasonable within an hour or so of Annapolis to swap right over to your rig, or meet at my house in Annapolis.
And the goods....thanks for looking!
Its a great rack. Great price. I run them on several trucks including my 80. Stand on it all the time. Holds tons of gear plus you can fit the FR table under if wanted. I have the tie town hooks for that if anyone is interested.Ok, I think I'm finally ready to sell my Front Runner rack and ARB awning for the 80. I love both of them, but after over a year of ownership of my rig, I just don't see myself using them for what they are worth. Both were on my truck from the P.O., and he really spared little expense with the goods, which he used to their full function. I may kick myself if I sell and don't have for Fall Crawl (mainly for the awning), but that's how it goes if I want to move forward. If I had a place to store the rack without being completely in my way all the time, I'd probably keep the setup as it is really solid. That said, the cash would go to good use for suspension upgrades on mine while making my wife happy for not always tapping the bank account for my toy stuff.
I'll list here first for the local group, if I don't have any interest, I'll post to a larger audience in a week or so...
New, the Front Runner is going for $1,650 and the ARB awning about $350, so it's a $2k combo retail. Condition is very good on both with just a few scrapes on the rack and a minor scrape on the awning cover, but otherwise excellent. Asking $950.00 for the combo setup and would prefer to sell the awning first if I split up. If I sell the awning alone, I'd say $200 with the Front Runner brackets or $175 without the brackets.
Size on this one is 56" wide by 85" long and sits about 2" above the roofline. I still have the factory center strips, but I think you'd need to remove the side rails for clearance. The ARB awning has the Front Runner brackets, so it mounts really solidly on it and is close to the full length of the rack. I forgot to measure the pull out, but it looks about the same as the length or a little longer.
As of now, I'm running the 315's and about 3.5"-3.75" of lift and can still fit into my standard garage by about an inch....I'm happy to leave on the truck and meet somewhere reasonable within an hour or so of Annapolis to swap right over to your rig, or meet at my house in Annapolis.
And the goods....thanks for looking!
Alexy - The Gaffs are yours.
Not my 62 and I don't know the seller, but in case anyone is interested,
Frame seemed pretty clean
Frame seemed pretty clean
NEW-Unused Dunlop AT20 Grand Trek P265/70-R17 asking $25 Zero, FREE to a good home
This was the spare on my 2018 T4R. It was never run on the road (or offroad). Still has the nipples from the mold and the tread markings.
Local pickup, Mud Ship, or delivery to Fall Crawl.
This was the spare on my 2018 T4R. It was never run on the road (or offroad). Still has the nipples from the mold and the tread markings.
Local pickup, Mud Ship, or delivery to Fall Crawl.
Last edited:
TRD OffRoad Premium running boards $40 obo Free to a good home until Fall Crawl. If you wrack yours at FC and want these as replacements so the wifey doesn't get mad, they are gonna cost ya so speak up now before the price goes up, or they go to the dump!
These came off my 2018 T4R when I installed BudBuilt sliders. Some dirt and a few spiderwebs, but undamaged and ready to bolt on.
Local pick-up, Mud Ship or Fall Crawl delivery.
These came off my 2018 T4R when I installed BudBuilt sliders. Some dirt and a few spiderwebs, but undamaged and ready to bolt on.
Local pick-up, Mud Ship or Fall Crawl delivery.
Last edited:
TRDdrew
SILVER Star
- Joined
- Mar 14, 2019
- Threads
- 32
- Messages
- 1,193
- Location
- Southern Maryland
- Website
- www.capitallandcruiserclub.org
Brand new oem shocks of an 80, they where installed but maybe on driven a mile or two
120 or trade me something
120 or trade me something
^^^Those are really some pretty good shocks for 80's with little to no lift. I've got about 50k miles on a set on my '96. There was no indication that the ones I removed were not the originals at roughly 250k miles! And they're way less expensive than almost everything else! Control your roll for cheap!
When you say little lift?
For sale is an Accuracy International AT rifle with an AX buttstock conversion. This is the newer version of the AT with a small firing pin and quick lock barrel change system. The AX conversion has been installed/bonded to the chassis using factory kit. The rifle also has an anarchy outdoors picatinny bipod spigot but includes all factory parts and paperwork (factory AI spigot, sling swivel bipod adapter) and one magazine. It is in excellent, close to showroom demo condition with no bolt face pitting. 510 rounds on the included AI 24" .308 barrel. 689 rounds on the action itself.
I can substitute either of the following barrels for the 24" .308 at an added cost:
- PVA 26" M24 contour 6.5"
- Proof Research 16.5" Carbon fiber .308
*note only the 24" .308 is included at list price
$4700 local transfer
The scope from this is also available- Kahles K624i SKMR3 with throw lever and parallax spinner. $1950
Thanks
I can substitute either of the following barrels for the 24" .308 at an added cost:
- PVA 26" M24 contour 6.5"
- Proof Research 16.5" Carbon fiber .308
*note only the 24" .308 is included at list price
$4700 local transfer
The scope from this is also available- Kahles K624i SKMR3 with throw lever and parallax spinner. $1950
Thanks
Does anyone need a fuel filler for an 80-series? Don't know what he wants for it, if anything, but it is available.
Look for a set of 80-series running boards in good condition.
Are you looking for a set? I just picked up a 97 that they look good on.
I have a set from a LX. They're just sitting in the attic. Free if you want them. Malvern, PA
Interested in a set.
I'm assuming they are the same as for an 80? Are they in decent shape? Would you be willing to ship? Thanks a bunch.
If memory serves, the end caps are different but I think the boards attach the same way. Might look a bit unfinished though. Not interested in shipping.
Okay. I'm tracking these down for a friend. Let me see what they want to do. Thanks for the help.
