lower trailing arms (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 30, 2022
Threads
1
Messages
1
Location
aust
Hi All,
I have standard oem lower arms to fit to 80, they have no markings.
They don't appear to have any off set, Is there a front and rear or left and right for them or can they be fitted any which way?

Cheers
 
They can be fitted any which way. They are symetrical and identical.
 
While they're out, now is the time to up-armour those bad boys.

WHiacjAl.jpg
 
If you are replacing bushings, make sure to go by this TSB from 1996 which is reverse applicable.
 

Attachments

  • 80 SERIES CONTROL ARM BUSHING ORIENTATION TSB 1996.pdf
    31.1 KB · Views: 41
While they're out, now is the time to up-armour those bad boys.

WHiacjAl.jpg
It helps, but they still bend.
I’ve even bent one of my blackhawk replacement. 🤦‍♂️

4A01CD30-7598-481A-B872-23E8AD523DF6.jpeg


77E8BBDB-398B-4069-9308-9FA95DF7EB9D.jpeg
 
1/4" wall dome tubing cut in half never been a problem since. plus 93/94 have bigger arms.
1670459810554.png

Bent up a few before that, been about 5 years now no problem ;)
 

Users who are viewing this thread

Back
Top Bottom