Little 25 treasures (1 Viewer)

[JohnnyC]

that alright...you could take a digital picture of it...it doesnt have to be best quality...just cool to see ...when ever you can get to it...

If i were you i'd be hording all of it LOL

 

[tbinzo]

living in the past

I'm learning every day about this car of mine thanks for the heads up on the light socket just one more thing that I have to find now!

Not sure what I'm going to sell at this point. You do know the models with tailgates did not get rear step. Those had a trailer light socket and pintle hook. They show them in the owner's manual.



Have a problem Johnny our printer scanner is out of ink and shows a error code which has it locked up until ink is replaced. Not sure we want to waste money on ink when we hardly ever print anything. Worst case my wife can scan it at work next week. The bows look close to the original except for the B pillar. The doors are two piece and come apart. The piecing is about half of what it cost to buy a OEM soft top for a stripped FJ40 model.

 

[Living in the Past]

OEM Jack

Old OEM jack. Not sure where I got it or how long ago but it's pre 63 part number.

 

[Living in the Past]

Husky Soft Top

Haven't had a chance to scan it yet Johnny but here are a few digital pictures.

 

[My wife said no FJ!]

Nice jack!

 

[JohnnyC]

very cool top

Husky --> Dualmatic --> Bestop soft top

 

[JohnnyC]

looks like the bows were their own ...but...the canvas could be used for oem as well as their bows

would Love to find somebody with one !!!

 

[67azcruizr]

when I learn how to download photos, I'll send a photo of one with a key. John Pardi 60/25

John, i know it's going back some but do you still have this lock and key?

I'd love to see a picture of it if you do.

 

[pardion]

John, i know it's going back some but do you still have this lock and key?

I'd love to see a picture of it if you do.

I will work on that. John

 

[ClemsonCruiser]

Old OEM jack. Not sure where I got it or how long ago but it's pre 63 part number.

that is too cool john!! never seen one before

 

[Living in the Past]

Old OEM jack. Not sure where I got it or how long ago but it's pre 63 part number.

that is too cool john!! never seen one before

This one is also different in that the bottom side rolls up both front and back. My other ones only roll up on the end you crank on. My 65 FJ45LP-B had the original jack and I noticed I had another like it except the other one had phillips screws while the 65 still had straight head screws. Now if I could just remember where I got it. The only reason I know which one came in the 45 is because the PO had painted it black along with all three pieces of the handle. I'm beginning to think ths may have been the last FJ25 I bought. Which was also the oldest one.

 

[Aussie 25]

RK30-91100 is the correct PN for a FJ25 jack.

 

[tbinzo]

Head Lights

How about this NOS Koito head lights yep you just have to be persistent you could find anything!

RK30-91100 is the correct PN for a FJ25 jack.

 

[majojo4]

Are you kidding me? I have one of those...not new. Cool items.

 

[My wife said no FJ!]

Very cool lights!!!

 

[67azcruizr]

the "Mother" emblem!

 

[My wife said no FJ!]

Sweet !!!

 

[Aussie 25]

Just a few bits i found last weekend.

 

[Living in the Past]

the "Mother" emblem!

So Sean are you planning on making more of these and the other large Toyota emblem? Also what is the status of the early turn signal lenses? Any updates?

 

[67azcruizr]

So Sean are you planning on making more of these and the other large Toyota emblem? Also what is the status of the early turn signal lenses? Any updates?

the "mother" emblem is in the works for reproduction as we speak, the large "Toyota" emblem has not been discussed yet and the remaining order (12 complete sets/48 pieces) of lenses should be here within 10 days.