It's on! No turning back (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@Poser Steve your write up here in the 60 section was a big help when it came to adjusting the e brake. and Bob its been more fun working on and trying to figure out what we were doing than I have had in a long time LOL

IMG_20170402_164114830.jpg
 
The 80 parking brake works awesome once you get it setup properly, I love mine.
 
this is so cool. be sure to leave him something to do!
 
Last edited:
what about the Bilsteins you were measuring?
What are the dimensions you are looking for?
 
PabloVTA said:
what about the Bilsteins you were measuring?
What are the dimensions you are looking for?
Click to expand...

After talking with Andy, he suggested that we go with a different shock. So Brooks wants to run Fox shocks that we can stiffen up if needed. I hope to get the front hoops welded on this weekend, and then measure for the shocks.
 
I'll send you my old Bilsteins if you want to see for yourself. Very low miles. You could at least drive it around. Let me know.
 
Cruiserdrew said:
I'll send you my old Bilsteins if you want to see for yourself. Very low miles. You could at least drive it around. Let me know.
Click to expand...
Thanks Andy! We have the Blistens
Cruiserdrew said:
I'll send you my old Bilsteins if you want to see for yourself. Very low miles. You could at least drive it around. Let me know.
Click to expand...

Thanks Andy! We have the Blisteins that came with the truck when we bought it. I just ordered some shock hoops from Trail Tailor @reevesci, once i get them installed I will get some measurements and get them ordered.
 
Great build, Gentlemen! Every day there's something on here that makes me proud to be part of this group. I bought my FJ62 eleven years ago and joined this forum right after, but it's only in the last year I've really gotten involved. Man, what I have missed out on!

Proud of y'all and proud of your son - sounds like he's gonna make a great Marine (I served with VMFAT-101 at Miramar for four years as a Navy guy; I wouldn't trade a day of my time with them!).
 
Dozer18 said:
Great build, Gentlemen! Every day there's something on here that makes me proud to be part of this group. I bought my FJ62 eleven years ago and joined this forum right after, but it's only in the last year I've really gotten involved. Man, what I have missed out on!

Proud of y'all and proud of your son - sounds like he's gonna make a great Marine (I served with VMFAT-101 at Miramar for four years as a Navy guy; I wouldn't trade a day of my time with them!).
Click to expand...

Thank you and your family @Dozer18 for your service! Yes this place is amazing with info and the people we have met through here.
 
reevesci said:
I figured since I stiffed you on the last few orders I needed to make up a little!!!!

J
Click to expand...
Great products ! started getting the front shock hoops installed, front steering is done, fine tuning the interior, wiring, final checklist under the rig is underway and today we should have the air lines for the lockers installed, mock up temporary rear bumper

IMG_20170406_161816125.jpg


IMG_20170406_161823125.jpg


IMG_20170408_192852833 (1).jpg


IMG_20170408_192840091.jpg
 
You must log in or register to reply here.

Similar threads

cruiserpilot
Marlin Crawler Axle Seals
Replies
6
Views
467
Spike Strip
Spike Strip
ceylonfj40nut
Marlin Crawler Carb Rebuild Video-Master Class
Replies
2
Views
581
DFXR
D
andrewkimball
FJ62 - Time to move it on...
Replies
2
Views
380
andrewkimball
andrewkimball
MudBudCruiser
No Spark
Replies
11
Views
1K
MudBudCruiser
MudBudCruiser

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom