Fj62 it's a state of mind

[RevISK]

Similar to this but for later FJ60 with the 5th side:

Shift Lever Boot for Land Cruiser FJ60

Reproduction 4 or 5 speed transmission shift lever boot for Toyota Land Cruiser FJ60. Includes, outer, inner rubber boots and the metal retainer. Based on 58280-90A02, originally specified for 10/'82 to 4/'84 60 Series. The holes at the base are 157 mm and 110 mm apart, center to center. The...

www.cityracerllc.com

 

[cruisermatt]

Similar to this but for later FJ60 with the 5th side:

Shift Lever Boot for Land Cruiser FJ60

Reproduction 4 or 5 speed transmission shift lever boot for Toyota Land Cruiser FJ60. Includes, outer, inner rubber boots and the metal retainer. Based on 58280-90A02, originally specified for 10/'82 to 4/'84 60 Series. The holes at the base are 157 mm and 110 mm apart, center to center. The...

www.cityracerllc.com

Won't fit a +10/84 without mods. Bolt pattern is different

 

[RevISK]

Won't fit a +10/84 without mods. Bolt pattern is different

Yes. Was just pointing out the double boot factor, hence "similar to this but..."

Five sided later ones are hard to legitimately find.

 

[WyattEarp1789]

South American! Came from Colombia.

Hey budd, I am currently in Bogota. Just bought my own South American spec not to long ago.

 

[Krawczyk80s]

Hey budd, I am currently in Bogota. Just bought my own South American spec not to long ago.

Awesome! I hate living in CT. Since it's a grey market, I have to go through safety inspection even though it already had a us title. Been about 2 months to work out all the kinks and I'm still not registered :/.

ALso found brass in the transmission. Third gear synchro is gone, cannot down shift into it. Was really hoping not to spend this much money but looks like I have a h55f rebuilt on my hands soon.

80 series steering gear in, power steering pump, all new wheel bearings, shifter bushings, new calipers, outer wheel seals, windshield wipers, squirters, removed tint and new mirrors. Still need to get a pair of new corner lights, some molded floormats, manufacture transmission tunnel cover, and gotta install some harness points for baby seats.

Wish me luck on Tuesday.

 

[cruisermatt]

Thanks for the order! I appreciate your business and support
I'm still confused though as to why you need to make a transmission tunnel cover. I have a bunch of good used ones that would be proper for your setup here, be happy to sell you one.
For the transmission, unless you are going to do it yourself. just go straight to a new one. They aren't really worth it to pay rebuild labor on if it needs a single hard part you'll be over the cost of a new one.
That being said I will have a good used H55f available soon.
you could also put a 85-87 H42 in which are availble in good shape for super cheap/free from H55f installs.