My lift gate is rusting through just below the window, so I've picked up a donor off of a '91 with the same color. I'll keep all components and wiring harness and replace it in the donor lift gate. I removed the lift gate with no problem from the donor truck. However, I have a problem getting wiring loose on my rig.
Neither connector wants to come out of the hole at the roof. I mistakenly pulled one of the connectors from the bare wire (1st pic), now I can't get the other connector out either. There doesn't seem to be enough depth to turn the connector perpendicular to the hole. No mention in the FSM that I could find either. Any suggestions?
Neither connector wants to come out of the hole at the roof. I mistakenly pulled one of the connectors from the bare wire (1st pic), now I can't get the other connector out either. There doesn't seem to be enough depth to turn the connector perpendicular to the hole. No mention in the FSM that I could find either. Any suggestions?
Last edited: