The PO had the hg done at the dealership in Hermiston. The work order shows no charges for extra work other than re-surfacing. She’s vault on wheels.
Builds Fix'n up the Land Cruiser.....
- Thread starter TYM4FUN
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
mudgudgeon
Resident galah
Agreed, valve stem seals seem to be a common cause of high oil consumption in these
Sounds amazing.
- Thread starter
- #804
#4 injector has open wires I missed or they opened upon assembly. I have 6 new clips and some repair wires inbound. Pins look good, so I will try to install some 3:1 shrink tubing. If that doesn't workout, new wire pins. Going to get a closer look at the rest as well. Injectors test good and 12v at all the terminals.
Little late to the party but excellent work on the engine bay. That has to feel good going through what you did and they overall final result.
Man, seeing your dampening, I really feel like I went overboard on mine LOL. I have a felling I will be trimming quite a bit back when I get to fitment but still unclear on my direction overall on finish.
Man, seeing your dampening, I really feel like I went overboard on mine LOL. I have a felling I will be trimming quite a bit back when I get to fitment but still unclear on my direction overall on finish.
- Thread starter
- #808
Thank you
Somebodyelse5
16124-75030
looking good. you are making me wish i did the cargo area with foam after I deadened it! Any issue getting interior panels back in and fitting?
- Thread starter
- #811
Haven't checked yet...
- Thread starter
- #814
Yup, all work great now. Never had a window wiring issue...
eyyyyyyyyyyyyyyyy, fellow mirror cover destroyerNew window runs, inner/outer felt strips and both front window motors replaced. (Backs motors already replaced)
View attachment 2907196View attachment 2907197View attachment 2907198
And a RIPmirror cover.
View attachment 2907200
I need to do this badly but afraid of destroying the door covers taking them off!New window runs, inner/outer felt strips and both front window motors replaced. (Backs motors already replaced)
View attachment 2907196View attachment 2907197View attachment 2907198
And a RIP
View attachment 2907200
- Thread starter
- #817
At least order all the items just in case they go NLA..... Door covers survive pretty well with patience. Mine have been off numerous times. Just make sure you stock new clips. Looks like the mirror cover I broke is still available, so I have new ones inbound.
Door cards are pretty easy to remove. I always remove the mirror cover with kid gloves. Good to know they're still available (at leas for now).
- Thread starter
- #820
Wiring had more issues so instead of continued repairs, I decided to do what I should have done, a new harness.
Heat wrapped the rear injection wires by the EGR and the rest of the harness back with tape and blanket.
Verified #4 signal from ECU with new harness
Heat wrapped the rear injection wires by the EGR and the rest of the harness back with tape and blanket.
Verified #4 signal from ECU with new harness
Last edited:
