g-man
SILVER Star
1. Get a used passenger side seat bottom in good condition.
2.Remove your seat and take it to an upholstery shop with the seat bottom.
3. Ask them to replace the vinyl around the bottom of the seat cover. Tell them that the vinyl should go all the way to the seat back joint on the side closest to the door ( a passenger seat will have cloth material here close to the hinges.
4. Tell them to grind down the metal frame that has the sharp edge on it that is tearing the vinyl.
5. Get them to install new foam for the seat bottom and back (that they cut and shape).
Drive to an upholstery shop (or two) first if you need an estimate. had all this done for about $125. in 2018. Major upgrade in comfort. And you can't even buy the replacement foam for this little money.
BEFORE:
AFTER:
2.Remove your seat and take it to an upholstery shop with the seat bottom.
3. Ask them to replace the vinyl around the bottom of the seat cover. Tell them that the vinyl should go all the way to the seat back joint on the side closest to the door ( a passenger seat will have cloth material here close to the hinges.
4. Tell them to grind down the metal frame that has the sharp edge on it that is tearing the vinyl.
5. Get them to install new foam for the seat bottom and back (that they cut and shape).
Drive to an upholstery shop (or two) first if you need an estimate. had all this done for about $125. in 2018. Major upgrade in comfort. And you can't even buy the replacement foam for this little money.
BEFORE:
AFTER: