Factory Tool Bag availability (1 Viewer)

[hobbes]

Looking for a canvas tool bag with handles for the lug wrench and jack handle. Toyota shows 09120-60100 being available for 1972-1980 FJ40s. However, on cruiserparts a search of that number shows a tool pouch like the one in my 80 series (09120-60111). Not sure if that is accurate or not. Anyone ever order 09120-60100 and Have a photo? Also, is someone on here making the d-rings and rubber bands? Thought I saw them, but cannot find them now.

Thanks...


09120-60100 parts photo below:

 

[sterling]

I bought this off EBay I believe after Googleing the part number for a link.
Came from Japan

 

[GA Architect]

Looking for a canvas tool bag with handles for the lug wrench and jack handle. Toyota shows 09120-60100 being available for 1972-1980 FJ40s. However, on cruiserparts a search of that number shows a tool pouch like the one in my 80 series (09120-60111). Not sure if that is accurate or not. Anyone ever order 09120-60100 and Have a photo? Also, is someone on here making the d-rings and rubber bands? Thought I saw them, but cannot find them now.

Thanks...


09120-60100 parts photo below:
View attachment 1440785

FWIW: The part number for a '77 canvas tool bag is 09120-60050 (4/72 - 7/80).....that part number does supersede to the 09120-60100 bag shown above though.

Try this website for the bag you are looking for, Tool Bag.

 

[hobbes]

Thanks guys. I knew about the part number change. Based on that photo, it is very similar to what is in my 80. The Cruiser World bag certainly looks nice. Maybe too nice for my purposes. Considering just a generic canvas bag as well. I'll need to track down the NLA mounting hardware before I decide on a bag. Or just come up with plan B with some hardware store d-rings.

 

[GA Architect]

Thanks guys. I knew about the part number change. Based on that photo, it is very similar to what is in my 80. The Cruiser World bag certainly looks nice. Maybe too nice for my purposes. Considering just a generic canvas bag as well. I'll need to track down the NLA mounting hardware before I decide on a bag. Or just come up with plan B with some hardware store d-rings.

hobbes - Being the '77 OEM tool bag hold-down brackets, band and clip are not available from Toyota any more, here is what I did for $25. Cleaned and installed a mini-tuck tool bag hold-down bracket, band and clip. It's not an OEM specific combination unit for a '77, but it is a Toyota OEM part.

Note, I later sourced the correct OEM hardware for my '77 FJ40.

 

[hobbes]

That's a pretty good setup. Its not too narrow?

 

[GA Architect]

That's a pretty good setup. Its not too narrow?

Worked fine for a year or so.

 

[Michael B]

@Racer65 has some of those hold down parts available on his website.

 

[brian]

Try this website for the bag you are looking for, Tool Bag.

That's the one I went with.