E&E Off-Road 200 Series Skid Plate System (4 Viewers)

[turbo8]

Just for clarity, the imperfections are just cosmetic scratches/dents?

Correct, I'll post pictures soon.

 

[poppe]

Correct, I'll post pictures soon.

Sweet. I’d be interested to see/consider purchasing.

 

[turbo8]

Sweet. I’d be interested to see/consider purchasing.

 

[turbo8]

I think most imperfections will buff out.

 

[poppe]

I think most imperfections will buff out.

View attachment 3634623

Sick yeah that’s not bad. So is it just cosmetic? Like install shouldn’t be an issue? I have a 2013 LX570. I’m not handy enough to do modifying if like the imperfections are alignment or holes though.

Let me know if call, text or email is better for ya.

 

[turbo8]

Sick yeah that’s not bad. So is it just cosmetic? Like install shouldn’t be an issue? I have a 2013 LX570.

Let me know if call, text or email is better for ya.

Yeah, just cosmetic. Go onto the website www.ee-offroading.com to place your order.

 

[poppe]

Never mind I got it. Just had to keep brute forcing with some different screw drivers. So far the hardest part of the install haha!!

Any tips on removing this piece. I cannot for the life of me get this removed.

 

[tbisaacs]

Never mind I got it. Just had to keep brute forcing with some different screw drivers. So far the hardest part of the install haha!!

Any tips on removing this piece. I cannot for the life of me get this removed. View attachment 3640856

Just cut the zip tie and add your own after

 

[bloc]

Never mind I got it. Just had to keep brute forcing with some different screw drivers. So far the hardest part of the install haha!!

Any tips on removing this piece. I cannot for the life of me get this removed. View attachment 3640856

On the other side there is a small tab that you push to release the gray brace from the metal bracket.

 

[poppe]

All done. What a blast this was putting this together. Easily my favorite car related project I’ve done. I’m really blown away at the build quality and the thought out design.

For someone not dumb like me, you could do this pretty fast I think. I forgot to remove to undercarriage pieces at first, then ran out of locktite (had to go to store), and then my jack stands didn’t come so I didn’t this all just squeezing my old fat belly underneath in high mode. With stands you could move fast.

Now going to try and clean up the flaps to match @turbo8

 

[turbo8]

All done. What a blast this was putting this together. Easily my favorite car related project I’ve done. I’m really blown away at the build quality and the thought out design.

For someone not dumb like me, you could do this pretty fast I think. I forgot to remove to undercarriage pieces at first, then ran out of locktite (had to go to store), and then my jack stands didn’t come so I didn’t this all just squeezing my old fat belly underneath in high mode. With stands you could move fast.

Now going to try and clean up the flaps to match @turbo8

View attachment 3641309

Thanks @poppe it's always good to hear good and even bad experiences. Glad yours was good!

These are all sold out, if there is more interest, I'll make another run.

Thanks everyone that purchased these, especially early adopters!
@Tex68w @teejnut @Supra Turbo @wingnutted @A10Driver @i4c4lo @bloc @prwillard2 @Leelanau @MTNLIVIN @chriscosta416 @ElJayBird @Adrenaline6 @ontopofm @Whiskerz @KenB @SidZer0 @abawockee

 

[chriscosta416]

Thanks @poppe it's always good to hear good and even bad experiences. Glad yours was good!

These are all sold out, if there is more interest, I'll make another run.

Thanks everyone that purchased these, especially early adopters!
@Tex68w @teejnut @Supra Turbo @wingnutted @A10Driver @i4c4lo @bloc @prwillard2 @Leelanau @MTNLIVIN @chriscosta416 @ElJayBird @Adrenaline6 @ontopofm @Whiskerz @KenB @SidZer0 @abawockee

Seriously probably the most well designed product I ever purchased. @turbo8 I think you should expand out to other vehicles, the subframe design is so unique and makes working on the truck so easy!

 

[LTSR]

Seriously probably the most well designed product I ever purchased. @turbo8 I think you should expand out to other vehicles, the subframe design is so unique and makes working on the truck so easy!

I agree. Install It was 2.5 hours but it was enjoyable seeing the beautiful pieces come together.

I ordered at 5pm and had the the full skid set at my door the next day by 3pm. One of my favorite mods and @turbo8 is very responsive. Full endorsement from me

 

[Supra Turbo]

Agreed with everyone else - this is one of, if not the best product and customer service I have ever experienced. From craftsmanship of the system to install support - @turbo8 is the best.

 

[Valgrind]

All done. What a blast this was putting this together. Easily my favorite car related project I’ve done. I’m really blown away at the build quality and the thought out design.

For someone not dumb like me, you could do this pretty fast I think. I forgot to remove to undercarriage pieces at first, then ran out of locktite (had to go to store), and then my jack stands didn’t come so I didn’t this all just squeezing my old fat belly underneath in high mode. With stands you could move fast.

Now going to try and clean up the flaps to match @turbo8

Now you just need turbo8's recovery points to match

 

[Valgrind]

Agreed with everyone else - this is one of, if not the best product and customer service I have ever experienced. From craftsmanship of the system to install support - @turbo8 is the best.

Certainly my favorite install I've done. Agree with all of this. So impressed with the build quality and how thoughtful the design was. Very happy to have done this by just putting the truck on some ramps, a creeper is a must!

 

[poppe]

Now you just need turbo8's recovery points to match

I was just looking at those! Ha.

 

[poppe]

Question for anyone, if trying to rotate tires and get the car on stands, I used to use the center jack point coming from the front of the car. But now with these plates, do you do the same or is there a better way of doing this?

Attaching a photo from a YouTube for reference.

 

[turbo8]

Question for anyone, if trying to rotate tires and get the car on stands, I used to use the center jack point coming from the front of the car. But now with these plates, do you do the same or is there a better way of doing this?

Attaching a photo from a YouTube for reference.

View attachment 3666504

You can jack from the same spot. The center is where the center screws are.

 

[poppe]

You can jack from the same spot. The center is where the center screws are.

Perfect. Thank you.