i4c4lo

Had to clean their oil off my windshield a couple times.

Did that Range Rover hire you to follow him? 😂

Sumo gear high range under drive and 3:1 low installed, I’ve only puttered around so far and I sure want to go play now.

OEM specs.. 8" front 9.5 rear, but I can customize for 9.5 front.

I sell them as pictured for guys that want to modify to their liking. I also have radius arm brackets, shock and coil brackets as well. Front or rear or pair. As pictured are OEM stock specs. Jason TT

Got another batch of 80 axle housings ready to go. Jason TT

And back on the road! Super rad couple. EDIT: those of you with 05/1995 and later 1HD-FTs: make sure to take a look at your injection pump and see what style fuel cutoff solenoid you have. If you have one with a “control unit” black box...

European HDJ80 landed at the shop. Always hate when Land Cruisers arrive this way, but we will get it going quickly and efficiently. They have been living out of this 80 for a decade. 🤘🤘

74weld made the portals but they do not fit the 80 housing. The custom housings under the Saudi 80 are made by @Delta VS. probably wrong on this but I believe they are D60 based housings so the outer C’s were able to adapt to the 74weld portals

The guys at Dissent Offroad absolutely crushed this build

The airboxes will be available very soon

I am selling my MTB and LC now!!

Especially for a mechanic. 🤢🤮 Cheers

4 River Ferries in 2 days... Alberta to Saskatchewan. 1. Bleriot Ferry near Drumheller 2. Finnegan Ferry... Interlude: Carolside Lake Campground.... 3. Estuary, SK Ferry - where the S.Saskatchewan Meets the Red Deer . 4. Lemsford Ferry...

I installed the most pornographic part in the Toyota master catalogue.

I don't know if this will help, but here is the SAE paper regarding the 1FZ-FE engine by the three engineers at Toyota who designed it.

After watching the early NFL game I got to installing the rest of the lines and removing the old stuff. To drain the power steering I used a dremel and cut a small hole in the paper clip of a cooler and let it drain into a drain pan. Once it was...

Started the process of installing the new power steering cooler that I sourced from Derale. Tomorrow I am going to cut the bottom of the paper clip cooler (bend closest to the ground) and let it drain into a drain pain, hopefully this will...

Looks good Dave .. I'm kinda with Matzell I'm missing the 1 ton part as well . 25k a axle ?

Doesn’t everybody??

Nice! Yep, we’ve been working on the axle project a lot for the last year. What we’ve got now is: 1. “Bolt in” front and rear one ton swap with ford “nine inch” high pinion diffs (but with 10” gears, have moved to Gearworks for that), trophy...

I used ChapGPT and with 4.88 and that 22% reduction you are looking at 5.95 as your final drive but I with the larger tires you get down closer to stock. ChatGPT 40s at just under 2K RPMs at 65.

After approximately 4,000 miles and lots of winging it, we've arrived in Anchorage! It was certainly an adventure getting here. The Alaskan highway is smooth to a point, but right after Whitehorse to just before Anchorage, it's a beast. My...

Positive update - I had the great fortune of meeting Steve, the owner of Overland Cruisers in Belgrade MT, at the suggestion of Torfab. I was able to get the 80 to him for his opinion and help. If he couldn't assist, I would ship it to Torfab...

Guess I need to post the final pics with the Dissent rear bumper, haha. I really like that I can open and slam shut each swing arm independently. Loving the bumper!