Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The rack is 1 3/4" from the highest point of the roof. Currently pricing is $1075 + $75 for shipping. That is with 5 crossbars and solid or light bar fairing@benc Could you measure the height of the roof rack from the roofline? I'm trying to determine if I can park my 99 LX470 in my garage with the rack installed. If so, I'll be selling my near-new ARB rack to get the Dissent roof rack.
Also, is pricing still $1000 shipped for the standard rack with 5 crossbars and light bar fairing?
Thanks!
How did you route your wiring?Rigid (and Baja Designs) were more than I wanted or needed to spend at the moment, so I spent a lot of time looking for something that wasn't complete crap. What I ended up with was this: S4D 40 inch Single Row OZ-USA® LED Light bar 4D reflectors spot flood combo off road 4x4 4wd race truck (Bought on Ebay for $110)
Just got it mounted up tonight. I threw a stainless and nylon washer on each side and had to go get some longer m8 bolts to close the small gap and it fits perfectly.
Comes with nice weatherproof wiring connectors. Shipped with a 30amp fuse. I cut it out and wired to my blue sea block; runs fine on a 7.5 amp fuse (it blew the 5 amp). Which I'd recommend since the wire isn't very thick.
I got this primarily for camping and setting up in the dark, I'm counting on it not being a great driving light but once I get some time with it maybe I'll come back and provide an update.
View attachment 1920543
How did you route your wiring?
You use Cat5? I was considering using cat5 when I was wiring my speakers from the stereo to the amp harness underneath the passenger seat but ended up using thicker gauge wiringI didn't finish that yet, but it will be going out the back of the hood and up the channel on the passenger side a-pillar. I have a 2nd battery on that side, if you don't the driver side would probably be easier. I'm in the midst of working on an elaborate control system for switching things (separate post on that at some point), but I am running some Cat5 cables through the inside A-Pillar and through the ceiling to the ceiling console. Had to remove the passenger sun visor parts to get the headliner down enough to get the wires where I wanted them.
Does anyone have Maxtrax's mounted to Ben's rack? If so, what did you use? Everyone is on back order for the standard maxtrax pins so I'm looking for another option.
I do. I use a set from Eezi Awn. They're meant to work with the maxtrax pins but you can use long bolts and nuts until the pins are back in stock.
Do you have a link by chance?
Purchased. Thank you.K9 MAXTRAX Mount Set
The MAXTRAX Mount is an ingenious way to mount 2 or 4 individual MAXTRAX to the side or the top of your K9 Roof Rack System. Designed to be used with the MAXTRAX Mounting Pin Set, which are high-quality black nylon and stainless steel quick-release pins (not included). The hole in the top of...www.equipt1.com