I think the red will make it faster and more mpgs
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I think the red will make it faster and more mpgs
Nice work, next up on my list too, if my truck survives the knife! Rust issuesView attachment 2287162
View attachment 2287163
View attachment 2287164
View attachment 2287165
P.S. Yes, I put the brake caliper back on lol. I also ordered a few more things:
1) Eibach Pro Truck 3" lift - a friend is buying my existing OME coils/KYB shocks combo
2) Delta VS Panhard relocation bracket & mil-spec battery terminals
3) DFG tilting 52 qt. fridge slide
4) CSI Black Ice 52 Qt. Fridge/Freezer from Mike's custom Toys
5) Metal Tech 4x4 sway bar drop bracket
6) Slee front & rear bump stops drop brackets
7) Not "ordered" - a buddy is building me a custom tire carrier/shelf system for the trunk area (quarantine projects ftw)
Now for a bunch of fluid changes, new belts, and other maintenance items while I wait for all this stuff.
*mud mob's triggering intensifies*I bet so many of us got instantly triggered by the red grease
It will. New TRE's are a world of difference in feel.Full set of 555 tie rod ends showed up today. Hopefully this, combined with the knuckle/wheel bearing replacements, tightens up my steering!
Wow that is ridiculously cheap for a fridge. Let us know how its holding up after running it for a few weeks.This came today. Such a great deal on this thing! Ordered and arrived within 3 days. $460 shipped for fridge and insulation bag. Check out the deal HERE on tacomaworld
View attachment 2290167View attachment 2290168View attachment 2290169
Also, my tie rod ends, Delta VS panhard bracket, and metaltech sway bar drop came in
Will do! I have high hopes, as tacomaworld folks have been very pleased with it. It’s also allegedly the old ARB fridge design that they no longer make, so the factory sells it to other vendors for rebranding now. Also looks exactly the same as Indel-B and Truckfridge branded fridges.Wow that is ridiculously cheap for a fridge. Let us know how its holding up after running it for a few weeks.
Need to replace the stereo head unit on my 94 fzj80. What make head unit did you use. Is the dash difficult to get behind? Saw a YouTube for a 96 head unit swap but that dash is a bit different. Any advice or tricks.Got my audio system back online with a new head unit, speakers and subwoofer. Gotta troubleshoot the driver side rear door speaker cutting in and out, but overall I'm stoked with how it came out. Hood strut replacement has become a challenge...the bolt for the little balljoint thing on the hood side disintegrated into mush after one attempt at loosening. Stopped after that one attempt since it'll likely be the same story on the other side
Pulling dash is easy take out the ash tray, and inside you will find 3 Phillip's screws, remove...Need to replace the stereo head unit on my 94 fzj80. What make head unit did you use. Is the dash difficult to get behind? Saw a YouTube for a 96 head unit swap but that dash is a bit different. Any advice or tricks.
Yup mine came with replacements for everything, but part 53440 above just turned to mush when I tried to loosen it smhYes pics of the new system! Mine sux sooo bad smh
I picked up struts that included the little knob on the hood, just take out old one, u can find that knob separately, I'll check..,part number etc
Edit: thar she blows
View attachment 2295135
Pulling dash is easy take out the ash tray, and inside you will find 3 Phillip's screws, remove...
With those out ur dealing with 3 clips up top, you can pull, mine needed to be unscrewed then ur golden, pull up n out, niceneasy
Now I am a bit confused. So, 80 series Al is not referring to a 94 model? The section of dash surrounding the stereo does extend in a narrow strip across top of steering column to end at driver’s door. Is there something more I should know?@hvlman is asking about a 94 model for which your instructions do not apply.