TLCA Cruise Moab 25th Anniversary 4/27/22 - 5/01/2022 (1 Viewer)
- Thread starter ajordan1975
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
We’re there
I figured I'd start this list cause I'm bringing a pretty good chunk of tools for most stuff Cruiser / Trailer related. If anyone needs anything let me know: 719-684-6181.
List of tools:
-Me & another ape willing to work on stuff.
-3/8 High torque impact (600ftlbs, it will pull most stuff off or break it)
-1/2 Drill & Full drill bit set
-Several good Lights (really bright headlamp, a little magnetic light, and a big self standing light)
-1/4, 3/8, 1/2 metric from 4mm - 38mm (complete) and 54mm, of course.
-Lots o' ratchets and extensions
-3/8 standard stuff up to 11/16 and some flip sockets
-1/2 Torque Wrench
-3.5 ton floor jack and a smaller bottle jack
- Basically any pliers under the sun including alligator pliers if you need to pop knuckles apart
-Wire strippers, crimpers, and a small butane soldering iron, plus some smaller gauge scrap wire
-Elec. Tape
-Allen, Torx and other random fastener bits in 3/8 and 1/2
- 1 - 3 Phillips, and some flathead, plus some micro drivers
-Several pry bars
-Brass Drift and 2.5 LB drilling sledge
-Several punches
-Gloves
-Stud pullers
-Metric Wratcheting Wrenches through 19mm (I'm not bothering with standard)
-A few sizes of adjustable wrenches.
-Lots of straps
-A few oil pans, funnels, lots of spare gear, engine, diff oil, and coolant.
-Good multimeter
-Tape Measure
-Hackzal and Blades
-Razor Knife
-Tire Pressure Gauge
-I have an ARB Twin on the Cruiser if you need air.
-Overland Metric Hardware Kit, plus other random stuff
Probably some more stuff, I can't remember it all.
-DJ
List of tools:
-Me & another ape willing to work on stuff.
-3/8 High torque impact (600ftlbs, it will pull most stuff off or break it)
-1/2 Drill & Full drill bit set
-Several good Lights (really bright headlamp, a little magnetic light, and a big self standing light)
-1/4, 3/8, 1/2 metric from 4mm - 38mm (complete) and 54mm, of course.
-Lots o' ratchets and extensions
-3/8 standard stuff up to 11/16 and some flip sockets
-1/2 Torque Wrench
-3.5 ton floor jack and a smaller bottle jack
- Basically any pliers under the sun including alligator pliers if you need to pop knuckles apart
-Wire strippers, crimpers, and a small butane soldering iron, plus some smaller gauge scrap wire
-Elec. Tape
-Allen, Torx and other random fastener bits in 3/8 and 1/2
- 1 - 3 Phillips, and some flathead, plus some micro drivers
-Several pry bars
-Brass Drift and 2.5 LB drilling sledge
-Several punches
-Gloves
-Stud pullers
-Metric Wratcheting Wrenches through 19mm (I'm not bothering with standard)
-A few sizes of adjustable wrenches.
-Lots of straps
-A few oil pans, funnels, lots of spare gear, engine, diff oil, and coolant.
-Good multimeter
-Tape Measure
-Hackzal and Blades
-Razor Knife
-Tire Pressure Gauge
-I have an ARB Twin on the Cruiser if you need air.
-Overland Metric Hardware Kit, plus other random stuff
Probably some more stuff, I can't remember it all.
-DJ
Last edited:
I'm hoping to be there around 2-4 tomorrow. Gotta gun Hells tomorrow night.
- Thread starter
- #127
Been home for a few hours. Great trip and great time! Hope y’all had a blast!
My trail leader magnet flew away on the highway on the drive home 
- Thread starter
- #130
Happened alot last year tooMy trail leader magnet flew away on the highway on the drive home
Disappointed. I always try to hold on to those and I completely forgot to pull it before I left.
- Thread starter
- #132
i have one you can have
- Thread starter
- #133
What truck was yours??
lol, I'll take one if you don't want it. Thanks a ton!
Made it back home last night. I had a great time with awesome folks on trails ranging from mild to menacing. Lots of wheeling and recovering/wrenching orhers. I’m back at work but will start sharing photos and videos as soon as I’m able.
Hey, I just want to shout out to @BadReligion for hauling my toybox and tcase to its new owner. He helped me out a ton, and is an awesome guy. Anyone want to buy a basically new 383 stroker? 
Also, here is a link to all the photos from me and all the Proffitt's guys from Cruise Moab: Cruise Moab 2022 - Google Drive - https://drive.google.com/drive/folders/1JGdAlz08GJ-SChJ7A9wchd7H8n1iwdPC?usp=sharing. There are some great videos of the Megacruiser and others in there as well. If you were on any of the runs with me, and have photos you want to add, or just want to stick some in, give me your email and I will add you as an editor.
Blue mini
Lockhart Basin overnight run.
Hanging with the tail gunner.
Made it within spitting distance of the river.
Lockhart Basin Overnight
Amazing scenery and vistas but sometimes you need to slow down and look a little closer.
Amazing scenery and vistas but sometimes you need to slow down and look a little closer.
