I hoping to make it. Just to observe and lend a helping hand— no projects I need help tackling.
Anyone interest to help with an OME kit in the spring?
How high are you going? I'll probably be able to help.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I hoping to make it. Just to observe and lend a helping hand— no projects I need help tackling.
Anyone interest to help with an OME kit in the spring?
Oh, how cute! You’ll learn what I mean....4 rolls of shop towels...
I’d really like to keep it less than 2” but the SOR grocery getter lift is a rip-off and man-a-fre doesn’t seem to have their low-lift OME kit anymore (If they’re even still in business). Will probably go light/medium or medium/medium OME.
Oh, how cute! You’ll learn what I mean.
I grabbed 4 tubes of grease, a bearing packer, 4 rolls of shop towels, I should have gloves, I'll grab 80W-90 for the diff tomorrow. I also plan on bringing some drink, does anyone have preferences?
Pappy isn't going to be an option.
Get at least 4 cans of brake cleaner too.
Mine's a 96, so looks like no, but I thought the main problem would be from a 3fe to the 1fz ... I'm wrong a lot though. I'll try to bring a bit of stainless with me to patch holes and what not.I'm down, but are our years compatible? I've got a 94, I know the exhaust routing is different for 91-92, 93-94, & 95-97.
Mine's a 96, so looks like no, but I thought the main problem would be from a 3fe to the 1fz ... I'm wrong a lot though. I'll try to bring a bit of stainless with me to patch holes and what not.
@Stumpalama what's your welder situation?
Does anyone have a 54mm socket that can be borrowed for tech day?
Also, other than the rebuild kit, basic tools, diff oil, and the grease for the knuckle, can anyone think of anything I should bring for a knuckle rebuild?
Thanks!
Can we make cookies after???
I prefer the Valvoline icing to the Betty Crocker. It really fills you up, though.Probably not cookies, but the leftover moly would look good on cup cakes!
I have a 1FZ as well, the problem stems from the routing of the exhaust.Mine's a 96, so looks like no, but I thought the main problem would be from a 3fe to the 1fz ... I'm wrong a lot though. I'll try to bring a bit of stainless with me to patch holes and what not.
@Stumpalama what's your welder situation?
OH yeah. I forgot the cat setup and other stuff.I have a 1FZ as well, the problem stems from the routing of the exhaust.
Alright, more stuff has been acquired.
I have:
4 tubes moly fortified grease
2 tubes red & tacky
4 cans brake cleaner
8 rolls shop towels
Marlin Crawler rebuild kit with new bearings.
Box of nitrile gloves
1 gallon of 80W90 gear oil. (I can do t-case & rear axle later)
Beer is next on the list, but nobody has made any requests.