CLCC Tech Day thread

iptman

 
Joined
Nov 22, 2008
Messages
3,570
Location
Northern VA
I was able to find Brembo rotors for my 80 for $50 each off of Amazon. At those prices it almost doesn't make sense to turn them, that is if you can find a place that does it anymore. Some Napas do.
 
Joined
Sep 8, 2017
Messages
75
Location
Alexandria, VA
I'd like to stop by for about 1-2 hours to swap out my rotors and pads if that's good with you. Can you post or PM your address and what time you plan on getting started? Let me know if we should bring any beer / food.
 
Joined
Oct 4, 2018
Messages
197
Location
USA
Anyone have a key programming device they can bring to the next tech day? I had a few new keys made (truck only came with one key) but they need to be coded. I have some instructions to activate the remote lock/unlock functions but I guess there is a programming device to activate the chip that will turn the ignition over for the new keys.
 
Joined
Feb 2, 2011
Messages
109
Does anyone have a 54mm socket that can be borrowed for tech day?
Also, other than the rebuild kit, basic tools, diff oil, and the grease for the knuckle, can anyone think of anything I should bring for a knuckle rebuild?
Thanks!
 

76FJ40

Old Fart
SILVER Star
 
 
 
Joined
Mar 1, 2002
Messages
4,193
Location
NOVA
rags, rags, rags, and more rags plus nitrile gloves.

Will you be replacing the inner axle seals and repacking the inner and outer wheel bearings? If so, the appropriate seals are required.
 
Joined
Jan 18, 2018
Messages
251
Location
Arlington, VA
Anybody wanna get rid of a stock exhaust? I wouldn't mind unloading my Borla (I'll weld up the little hole where the bracket snapped off) and put a stock pipe on there.
 
Joined
Feb 2, 2011
Messages
109
rags, rags, rags, and more rags plus nitrile gloves.

Will you be replacing the inner axle seals and repacking the inner and outer wheel bearings? If so, the appropriate seals are required.
I've got the Marlin Crawler rebuild kit, I think the inner seals are included.

Stump should have the wheel bearing socket.
Awesome, so I'll hold off ordering one

Anybody wanna get rid of a stock exhaust? I wouldn't mind unloading my Borla (I'll weld up the little hole where the bracket snapped off) and put a stock pipe on there.
I'm down, but are our years compatible? I've got a 94, I know the exhaust routing is different for 91-92, 93-94, & 95-97.
 
Joined
Feb 2, 2011
Messages
109
I grabbed 4 tubes of grease, a bearing packer, 4 rolls of shop towels, I should have gloves, I'll grab 80W-90 for the diff tomorrow. I also plan on bringing some drink, does anyone have preferences?
Pappy isn't going to be an option.
 
Top Bottom