Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 3
- Messages
- 417
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
That F'in rock has dented a lot of s*** in its dayThat F'in rock dented my red 60 back in the day
Builds Broski's Adventure Rig build thread (1 Viewer)
- Thread starter Broski
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
mudgudgeon
Resident galah
- Thread starter
- #1,443
What suspension work ?Nice to see with all the suspension work, they still flex like a brick!
Great pic!
For the most part it's stock, small lift & rear sway bar
But ya at that point it started to unload in the front. That's why I stopped and backed up
Before it got dark that day that picture had made it through the Cruiser community all the way to Montana and back to me via a text.
- Joined
- Jul 24, 2016
- Threads
- 73
- Messages
- 2,001
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
Found some more pictures from that day on my album that feature your cruiser- i don't know if these ones would have made it to ya. just a couple nice scenery shots.
i put a very over saturated preset on these pictures initially, might back it off a bit next time
i put a very over saturated preset on these pictures initially, might back it off a bit next time
- Joined
- Jul 24, 2016
- Threads
- 73
- Messages
- 2,001
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
ChaseTruck
--
I always thought that this style of photography actually matched how I saw Moab through my sunglasses. So a lot of my photos from Moab look like this.
Nice pics, and neat ‘wheeling action, as always on these pages.
It’s been too long -I hope I’ll make it back to Moab soon.
Great pics. You're putting extra motivation in me to get my build finished.
Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 3
- Messages
- 417
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
- Joined
- Jul 24, 2016
- Threads
- 73
- Messages
- 2,001
- Location
- BoZ ANGeLES
- Website
- backcountryadventuretime.com
Kane Kreek CM2024 c&co run - Google Drive
drive.google.com
heres the link to all the RAW photos i took that day for anyone who is interested. i didnt have the time to go back and put my preset on all of them
mudgudgeon
Resident galah
What suspension work ?
For the most part it's stock, small lift & rear sway bar
Yeah, not knocking anything you've done.
Amazing how well they work with a few mods, or none, and where they will go, and how predictable and stable they can be.
They are never gonna flex like a buggy, and they don't need to.
Great pictures, really hope to make it to Moab someday, to wheel and MTB. Hey Broski, do you carry a spare tire? Where do you keep it?
- Thread starter
- #1,452
Yes full size 39x12.50 17"
Lays flats in the back with a cage over it.
Packed and ready
Did you fabricate the cage? Nice use of space. My spare just sits under a net when it’s not on the roof. Something a little more secure would be nice.
If you have something smaller than a 39 this is an idea
Interior Tire Carrier - 80 Series Land Cruiser ('91-'97) - BellFab
Approximately 1 week lead time on all tire carriers currently. Available for Driver or passenger side works with tire sizes ranging from the factory 31" up to 40" (See disclaimer below for 40") 100% bolt in with no drilling required- Uses all factory bolt holes Hardware included Black...
bellfabrication.com
Yes, I have looked into this tire carrier but I don’t have 3rd row seating or the mounts.If you have something smaller than a 39 this is an idea
Interior Tire Carrier - 80 Series Land Cruiser ('91-'97) - BellFab
Approximately 1 week lead time on all tire carriers currently. Available for Driver or passenger side works with tire sizes ranging from the factory 31" up to 40" (See disclaimer below for 40") 100% bolt in with no drilling required- Uses all factory bolt holes Hardware included Black...bellfabrication.com
I thought someone sold a mount that didn't need it
- Thread starter
- #1,457
Yes I fabricated it myself.
My Rig see's a lot of hard core wheeling so having the spare secure is a high priority. keeping a low center of gravity was also a priority.
The cage is lightweight keeps the tire secure but need no tools to access it. The cage also doubles as a camping gear shelf that I can secure all my camping gear to but not have to unload the gear to access the spare tire, tools or recovery gear.
I'm sure it's not for everyone but it works well for me
nukegoat
Should have bought a Jeep
I have something similar but I use some destaco latches and the rack is on a giant hinge kinda thing so it clamps the tire when closedYes I fabricated it myself.
My Rig see's a lot of hard core wheeling so having the spare secure is a high priority. keeping a low center of gravity was also a priority.
The cage is lightweight keeps the tire secure but need no tools to access it. The cage also doubles as a camping gear shelf that I can secure all my camping gear to but not have to unload the gear to access the spare tire, tools or recovery gear.
I'm sure it's not for everyone but it works well for me
FMC80
SILVER Star
That's a yuge bitch!
Broski, I don't know why I'm not getting notifications for your build, but I'm glad I stumbled upon it again. Love the pics and adventure...what's next?Mine is envious of yours, she has been cooped up for too long!
- Thread starter
- #1,460
Same thing happens to me on threads I'm watching
I wish they could fix it. You have to unwatch then watch it again 
Ouray Colorado for SAS it's a great event incredible scenery, trails are over the high mountain passes pretty easy. You just don’t want to miss a turn or go over the edge
It's a family oriented event and I think you and your family would enjoy it, and no worries about damaging that sweet 80
Last edited:
