ASFIR 4X4
Supporting Vendor
soooooo....??
ASFIR Skid plates and front bumper
- Thread starter viducce
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
ASFIR 4X4
Supporting Vendor
Hi, you can find the petrol LC100 front skid here - Front Skid Plate
As for the 2 new skids, the Gear skid anf the Transfer skid, are en route to AZ as we speak. We'll update you all as soon as we get word after fitting and testing
94SRUNNER
GOLD Star
soooooo....??
Coming soon! Have a few maintenance items to do before it goes on.
ASFIR 4X4
Supporting Vendor
Great! Good luck and let us know how it went. we'd love for them pictures too
94SRUNNER
GOLD Star
Great! Good luck and let us know how it went. we'd love for them pictures too
Pictures to follow!
This is good news as I’ve been waiting to order the complete set - but I was under the impression that there would be a new front petrol plate with oil filter access, etc.Hi, you can find the petrol LC100 front skid here - Front Skid Plate
As for the 2 new skids, the Gear skid anf the Transfer skid, are en route to AZ as we speak. We'll update you all as soon as we get word after fitting and testing
I installed my front yesterday. Fitment is good, but with the slee diff cross member I had to extend the rear mounting holes.
Coverage is great in comparison to the stock plates. Looking forward to add the other petrol skids later this year.
Coverage is great in comparison to the stock plates. Looking forward to add the other petrol skids later this year.
can you explain more about the rear mounting holes? I have a slee diff drop as well and the plate coming. thanks
The nut-serts on the slee diff drop are about 1/8" to the rear from where the skid holes line up.
I used a round hand file to elongate the two rear holes on the skid by 1/8". It bolted up easily after that.
A note is that the slee supplied diff drop bolts do not have a very wide head on them. I added 1" outer diameter washers to them.
My adjustment if ASFIR wanted to accommodate for these other diff drops, would be to drill 5/8" rear holes vs a 1/2", and also move their centerpoint on the drilling location back 1/16th of an inch. Then supply two 1" OD washers. This would allow enough free movement to line these up while remaining secure. Would work for both stock and aftermarket diff cross members.
Your passenger side bolt isn't in all the way.
@AlpineAccess yeah I took the pic during the install. It’s tight now
ASFIR 4X4
Supporting Vendor
Oy, i'm so sorry about that! I'll pass this one on to make sure we do better the next time.
Kudos to this very responsive vedor.
en route to AZ? but I didn't get it!
BTW, I have received my front skid plate last Tuesday but have to wait for other maintenance items done to install it.
ASFIR 4X4
Supporting Vendor
en route for check-up and testing. not yet for selling... sorry!en route to AZ? but I didn't get it!
BTW, I have received my front skid plate last Tuesday but have to wait for other maintenance items done to install it.
Installed the front unit this weekend. With the ARB bumper and Slee diif drop, had to trim the front corners and extend the rear holes, but otherwise an easy install of a quality product.
Took my rig to my local dealer for an oil change with the front skid installed and they did it with no questions asked. I do not use the middle plastic skid at all. Kinda stoked to hear about the other two in development for the gassers.
Stupidly missed the discount code period but did decide to replace my rusty front skid plate, ordered the ASFIR yesterday and immediate order and shipment updates from @ASFIR 4X4 within 18 hours of order. Thanks, looking forward to installing.
dogdaysindurham
SILVER Star
I would like to request for a replacement gas tank skid! I really love my front skid.
