Anyone Specifically W/ 17's and 35's? (1 Viewer)
- Thread starter Bm3r
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
LC4LIFE
Supporting Vendor
There are tons in here.
forum.ih8mud.com
forum.ih8mud.com
No real reason to start a new thread.
Put pictures of the wheels you have in yours 80 series
Hello, Tomorrow i'm going to fit in my 80 wheels Mangels Modular Blacks in 15" x 8" ( ET - 24 ) and i get off my Hoffman Spacers. When they are in truck y put some pictures Miguel
forum.ih8mud.com
Official 35" and under!! Post pictures!!
This thread is for 35" and under tires on your rigs. Post your pictures and specs! :bounce::cheers::flipoff2:
forum.ih8mud.com
No real reason to start a new thread.
Fuel Vector D600 17x9 w/ 315/70/17 (0.2" smaller than 35's in BFG AT at least--34.4" OD vs 34.6")
I got them secondhand off of a guy on ExpeditionPortal, although they were new in box. They needed machining of the lip ($125 at a pro tire shop IIRC) to clear the hub size.
I got them secondhand off of a guy on ExpeditionPortal, although they were new in box. They needed machining of the lip ($125 at a pro tire shop IIRC) to clear the hub size.
- Thread starter
- #4
Yes, I have looked at those posts/threads. Personally not interested in “pro comp” style/looking wheels, or oem 17’s. I appreciate your posts 
Looking for what’s new out there that I haven’t come across.
Summit off road introduced a new wheel, but unfortunately it’s a 16”
Titan introduced their new T-AK1 17” wheel, just not a fan of the “steel wheel“ looking face.
Also, I like the Stealth Ray10s but will need to bored to fit
@lasoundguy great start and thanks for the info!!
Looking for what’s new out there that I haven’t come across.
Summit off road introduced a new wheel, but unfortunately it’s a 16”
Titan introduced their new T-AK1 17” wheel, just not a fan of the “steel wheel“ looking face.
Also, I like the Stealth Ray10s but will need to bored to fit
@lasoundguy great start and thanks for the info!!
Black Rhino Warlord. 17x9 -12mm bs with 315/70r17 Duratracs, came with a centering ring to adapt for the hub difference, and the center caps fit front and rear. Couldn't be happier.
jjdeneen918
SILVER Star
First generation Sequoia or Tundra wheels.
17” wheel. Currently running 1.5” SpyderTrax spacers from Slee.
17” wheel. Currently running 1.5” SpyderTrax spacers from Slee.
Road Apple
SILVER Star
Icon makes Offroad wheels that fit the 80 series backspacing needs. I’m looking at the Icon Rebound, but haven’t ordered yet. Seems like a lot of wheels require spacers, which I’m trying to avoid.
Checkout @Box Rocket here or on instagram, though he is on 37’s. Nice wheels !!
Checkout @Box Rocket here or on instagram, though he is on 37’s. Nice wheels !!
I hate spacers. Looked around a bunch and finally found some 17x8's with -10 offset (FN/Konig Countersteer Type X), which I hope will minimize rubbing. Wanted the narrow width to keep the beads tight when aired-down to single-digit psi with 37x12.5 MTRs.
I had the hub hole bored-out by the supplier's go-to machine shop to eliminate the center cap lip.
The tires and wheels are sitting in my garage waiting for some suspension tweaks and a regear (*$igh*), but I did manage a trial-fit and got a few pics when first received. Anxious to get them on the trail.
I had the hub hole bored-out by the supplier's go-to machine shop to eliminate the center cap lip.
The tires and wheels are sitting in my garage waiting for some suspension tweaks and a regear (*$igh*), but I did manage a trial-fit and got a few pics when first received. Anxious to get them on the trail.
george.arnold
SILVER Star
612 BRAVO GUN METAL 17x8.5IN -10MM OFFSET ALLOY WHEEL
We have designed this wheel specifically for wheeling enthusiasts. Our no center cap design has been optimized for off-road use and abuse. The outer lip has been given additional thickness for to resist gouges that may be encountered during low PSI conditions. The 12 ridges on the outside have...
tandem-offroad.com
315 Yokohama G003 MT
Method Race Wheels
Sorry, can't believe I didn't take any straight-on pics front or rear...this quartering shot is the closest I have. Slightly more poke-out, but not much.
I was shooting for a small bit of additional width to help with rubbing at full stuff with 37x12.5's, as my current set of 35's (315/75R16's) scrub the frame (rear) with the 0 offset factory wheels. The rubbing is harmless with the 35's, but I didn't want to try 0 offset with the taller and slightly wider 37x12.5's.
Given the stock 8" width, -10 offset, and when compared to factory rims, any tire on these FN's will poke-out an additional 0.4", so not much change in track width. Pretty sure they'd still be flush or sit inboard if you are running factory flares and 315's or 12.5's.
I'd offer that if you find a wheel you like, don't sweat it if you need to machine the hub bore...this will sting your wallet for a little bit, but you'll be left with what you want. Happy hunting.
Is the 25mm offset Icon offers the correct offset for an 80?
Discount Tire offers the Level8 MK6 in 17x8 -10mm offset (ET-10).
8" rim width is optimum in my opinion because it is the narrowest that meets the 37x12.5 tire manufactures recommendation, and so the tire store won't give you any grief or refuse to install, as I've heard some will with the 17x7.5" Sequoia Tundra wheel, which also needs a hub spacer because of it's 15mm offset. - add a 1inch spacer ( -25mm) puts the total offset there at -10mm (outward). A very good wheel and inexpensive, but it comes with a couple of issues.
That keeps the tire width profile to a minimum.
-10mm offset is nearly optimum - the tire is moved outward by 0.39" (a tad more than 3/8") relative to the hub mounting surface.
The OEM wheel is 16x8 ET0 (0mm offset) , as a starting point to compare.
8" rim width is optimum in my opinion because it is the narrowest that meets the 37x12.5 tire manufactures recommendation, and so the tire store won't give you any grief or refuse to install, as I've heard some will with the 17x7.5" Sequoia Tundra wheel, which also needs a hub spacer because of it's 15mm offset. - add a 1inch spacer ( -25mm) puts the total offset there at -10mm (outward). A very good wheel and inexpensive, but it comes with a couple of issues.
That keeps the tire width profile to a minimum.
-10mm offset is nearly optimum - the tire is moved outward by 0.39" (a tad more than 3/8") relative to the hub mounting surface.
The OEM wheel is 16x8 ET0 (0mm offset) , as a starting point to compare.
Last edited:
Road Apple
SILVER Star
The Icon page shows two 17x8.5" wheels with a 6x5.5 BP1
There is a wheel available in 25mm offset, but the bore is only 93mm.
The correct wheel is one line above with offset of 0mm, backspacing of 4.75" and bore of 106mm.
Rebound / Titanium - Icon Alloys - Icon Vehicle Dynamics
Icon Vehicle Dynamics quality off-road suspension system components, lift kits, coil over shocks, uniball upper control arms, leaf springs, life-time warranty and guarantee of all manufactured parts, and personalized customer service and tech support for Ford, Chevy, Toyota, Nissan, Jeep, Dodge...
iconvehicledynamics.com
Last edited:
Helpful, thanks!The Icon page shows two 17x8.5" wheels with a 6x5.5 BP1
There is a wheel available in 25mm offset, but the bore is only 93mm.
The correct wheel is one line above with offset of 0mm, backspacing of 4.75" and bore of 106mm.
Rebound / Titanium - Icon Alloys - Icon Vehicle Dynamics
Icon Vehicle Dynamics quality off-road suspension system components, lift kits, coil over shocks, uniball upper control arms, leaf springs, life-time warranty and guarantee of all manufactured parts, and personalized customer service and tech support for Ford, Chevy, Toyota, Nissan, Jeep, Dodge...
Running 35s on 17s I think -25 offset works great! No rubbing in the fenders and am not running bump stop spacers. I wanted to ditch my wheel spacers with my OEM 16s and 315s, so now running a negative offset 17 and really like it. These Relations Race Wheels are beadlock hybrids and weigh a little more than OEM, but my truck weighs 8000# and really wanted a heavy duty rim with higher weight spec. they come in the proper 106.4mm hub bore but needed small clearancing at the outside of the bore where the center cap fits. I used a router and flush bit to do it.
thatcabledude
GOLD Star
Here are my 17x8” -10mm FN Five Stars. Begging for 37s
(The center-bore will need center cap lip removed.)
Volk Racing TE37XT Wheel - 17x8.0 / Offset -20 / 6x139.7
Check out the deal on Volk Racing TE37XT Wheel - 17x8.0 / Offset -20 / 6x139.7 at Evasive Motorsports
www.evasivemotorsports.com
Volk Racing TE37XT Wheel - 17x8.0 / Offset -20 / 6x139.7
Check out the deal on Volk Racing TE37XT Wheel - 17x8.0 / Offset -20 / 6x139.7 at Evasive Motorsports
I absolutely love those wheels. I have them in bronze.
