Got the dash pulled and checked the climate module. Switch lights are functioning so I just needed to replace the 3 illumination bulbs. Easy Peasy and working great now. The buttons are still pretty worn so I ordered a full set of new ones from...
I think only one of the illumination bulbs is working...sort of....it flickers badly. The other two don't work. I'll have to look at the on/off lights again to be sure but I'm fairly certain those are also out.
Thanks Ryan! I definitely need...
Which lights are out? The 3 illumination bulbs or the on indicators in the buttons?
The 3 illumination bulbs are easy.
The on indicators are soldered in.
Replacement button part numbers are bulb info here...
a 9" light is a big freaking light. I have two 9" lights on my front bumper and wouldn't want to even try them in a ditch light position. On the hood would decrease a lot of visibility. Even if you moved them back onto the cowl cover it would...
I'm needing a working (good condition) climate control unit for my 1995 80 Series. Some of the lights have gone out in mine and the buttons are showing some wear. I know I can get replacement buttons but that doesn't solve the lighting issue...
I've lost a few of the lights in the climate control unit in my 80. Is there a reliable source people are using for repairs of the lighting and replacement buttons? Or is there a replacement unit source? Any direction would be appreciated...
Met up with some cruiser heads in Texas while on a work trip.
Alberto, Galen, AJ and @Dirty Koala .
I dont know there handles here
Also finally put a front sway bar.
Ouch....
Yes, exactly what went thru our heads when We got the call about this poor 94 FZJ80 that was just in an accident. To make things worse? 49k miles on her.
Well, guess what? Our team did an amazing job bringing her back to life, with...
I noticed some weird fitment with the L shaped pieces and I though the same thing but I just needed to flip the pieces over and the fitment was perfect.
I'm not seeing the advantage.
I prefer to run a lower lift (under 3") and bigger tires This work really well for me.
A lot of heavily modified vehicles were struggling with this obstacle, with a 2" lift (netting 23/4" lift) and 39s I walked...
I have been running the 1.5" spidertrax spacers for years with 35's and with 37's. Some years were with the OEM wheel and 35's, and some with aftermarket 16" wheels. Since going to 37's it's been on an 17" aftermarket wheel. Whether or not...
What kind of shape is your core support in at the front body mount? I've seen several rust enough to collapse slightly at/above the body mount and that would certainly put undue stress in the locations where your inner fender cracked. Also, if...
Good suggestion. I'll check the core support but it all looked good when I replaced the body mounts a couple years ago. Worth checking again to be sure. I have trimmed the lower corners of the core support, so I suppose that could have...
I was working on a few things yesterday and had the passenger front fender (and snorkel) off and I noticed these cracks. I assume from body flex and making contact with the snorkel inlet where is passes through here to the airbox.
I welded up...
Right - once upon a time I had a Disco II and it would break my heart every time I had to repair it, which was often.
Although I can't claim that my 80 has zero leaks at the moment - working through those now. 🙃
Nicely done @Box Rocket, I...