Any tips on getting this washer back in place?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 15, 2023
Messages
33
Location
Australia
The washer that's pressed into the alternator mount has popped out (Wether it's supposed to to that or not idk) and I can't get it back in to refit the alternator anyone got any tips on how to do it or is there a tool that will do it.

20231210_201141.jpg


20231210_201129.jpg
 
Use a C-clamp

FWIW, it's a sleeve, not a washer.
 
Last edited:
Measure the bracket bolted to the engine that the alt mounts to.
Make sure that piece sticking out is not meant to be sticking out.
 
That’s a brass bushing I would guess that’s why you can’t remove the washer🤷‍♂️
^^^ This
If you can't maneuver a C-clamp in there a nut & bolt and a big washer should pull the bushing in
 

Users who are viewing this thread

Back
Top Bottom