Alibaba Bumpers (1 Viewer)

[medtro]

I ordered the rear bumper, took them 2 weeks to fab it. Shipping is longer because I arranged my own shipping. Bumper has been installed and driven for over 2 months. Nothing bad to report.

Shipping dimensions and weight:
Bumper: 199cm x 88cm x 34cm, 81.1 Kg
Carriers: 80cm x 70cm x 20cm, 18 Kg

Bumper metal thickness: 3mm
Bracket metal thickness: 6mm

 

[medtro]

Tire and can carriers.

Spindle and hitch.

 

[medtro]

 

[medtro]

Hitch is welded nicely. This is made for Land Cruiser and won't fit LX470. This is not their fault, they list the bumper for Land Cruiser, no mention of LX470. I contacted them and they were very responsive. They offered to make one for LX470 for $37 + $82 shipping.

 

[medtro]

I swapped the tie down brackets from left to right and vice versa because of the bumper bracket.

I made a hole on the bumper for spare tire access.

 

[hoser]

Does it have supports for the wings? If not, I'd consider adding some before the wings become sort of damage multipliers.

 

[medtro]

Does it have supports for the wings? If not, I'd consider adding some before the wings become sort of damage multipliers.

This is the support for wing. Could be better.

 

[hoser]

I'm talking about the side closest to the wheel well.

 

[medtro]

I'm talking about the side closest to the wheel well.

No support there.

 

[hoser]

You can place a jack below that wing and see how you feel about it. All depends on usage. More of an overlander, then probably ok. If your sliders are getting a lot of work, then the wings would want more reinforcement.