AussieHJCruza
Supporting Vendor
- Joined
- Jul 8, 2013
- Threads
- 64
- Messages
- 2,982
- Location
- New South Wales, Australia
- Website
- www.completecruisers.com.au
Looks like it's ready for a FMIC
Builds AK HJ-75 (1 Viewer)
- Thread starter coldtaco
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Where do all of you get these 12ht's from!?!
- Thread starter
- #563
I got mine from the Netherlands. Probably can get from Australia for less. Otherwise keep looking around on here and other places.
- Thread starter
- #564
Engine out, looks like I found the constant leak, rear main seal?
2fpower
SILVER Star
awesome build. loving it...
are you planning to keep the same couch disk o the improved HDT one ?
Renago- Are you saying that the 1HDT clutch is same as 12HT? Are the input shafts the same?
FJBen
SILVER Star
That could potentially be the front input seal on the H55f. Ask me how I know, I thought it was a rear main seal as well, mine was dry with 485,000kms, but I still thought that was the issues. Well, as you can imagine is started leaking once driving again and then I had to pull the tranny and fix it.
Possible it could be your rear main as well, but I would just fix that cheap input seal on the H55F now as it's easy to get do.
Another gotcha, my input shaft had a groove and I had to speedi-sleeve it as it would still leak. Info on my build thread around page 14.
BJ74 build page 14
I don't know if the HDT is the same as 12HT ,
was assuming that he had a 1HZ motor in .
- Thread starter
- #570
2H swapped for a 12HT
- Thread starter
- #571
Dash finally out
- Thread starter
- #572
Environmental system out
Keep that heater core. Hard to replace in the future. Coming apart with surgical
precision.. very cool
If you find yourself short of little grey bits in the end let me know
precision.. very cool
If you find yourself short of little grey bits in the end let me know
- Thread starter
- #574
Oh boy all removed. Some paint damage at the brake booster and clutch master cylinder.
- Thread starter
- #575
Wiring harness and extra wires
- Thread starter
- #576
Firewall insulation
- Thread starter
- #577
Other stuff removed
- Thread starter
- #578
More stuff removed
- Thread starter
- #579
Got some more parts painted. Inner fenders got sand blasted and painted.
- Thread starter
- #580
Found a difference between fold down windshield and non-fold down windshield, which I hadn’t noticed before. The windshield boot cowl for the fold down windshield has notches for the hinges.
