I have both a 1995 and a 93 1fz and need to swap the engines, wiring is fried due to engine fire in the 95 and the 93 is rusting to bits so I’m putting the 93 engine into the 95 because it has less kms on the engine and a new clutch. Can’t really find a harness anywhere for the 95 so iv been weighing up a few options. Put the ecu and wiring loom from the 93-95, try and use what’s left of the 95 harness and the 93 harness to make it work? What are my options? What’s possible? Mechanically I’m not struggling but electrically I’m baffled!! Help!!!