A beautiful cruiser on the way and his nearest neighbor is a 100 yards away...
I hate you.
I hate you.
84 FJ60 Resto,
- Thread starter SKINNER
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
She's going to be one perfect 60 when done, you sir are a craftsman.
Wow... huge day - thats a ton to get done in one day. Drinking a cold one to your build.
Butt Ugly Chuck
Fish Biologist
That's funny right thereFYI, these pics are proof of why a home in a non-HOA neighborhood is important
Getting close man! Can't wait for the big reveal
Butt
What are you using latex??
Use a mask bro! Enjoy that awesome sixty for a few years.
Looks awesome, you're in the homestretch.
Use a mask bro! Enjoy that awesome sixty for a few years.
Looks awesome, you're in the homestretch.
- Thread starter
- #346
A beautiful cruiser on the way and his nearest neighbor is a 100 yards away...
I hate you.
That's funny right there
Getting close man! Can't wait for the big reveal
Butt
Thanks fellas!
It made for a looong day, but it was worth it. Now I just have to block it out, shoot it with another coat of primer, shoot sealer, then base/clear. Just typing it makes me cringe. . . although, sounds like I will have access to a booth pretty soon.
- Thread starter
- #347
Nitrile, why? The epoxy is a bear to get off your hands once it dries.
Use a mask bro! Enjoy that awesome sixty for a few years.
I did with the epoxy, but I feel no need with the 2K primer. . . it's goes on so thick that the odor/fumes are very low. Plus, being outside made for excellent ventilation.
Im going to paint my cruiser pretty soon got any tips?
Nice Work! Looked like a beautiful day for painting! Keep it up! I wanna see the finished product 
- Thread starter
- #350
Man, I don't even know where to start. . .
You doing a complete strip and paint like I did? or just a scuff and resquirt?
Actually I was being a smart ass and asking if you were using latex paint when I seen you with no mask.
I use nitrile gloves for all my wrenching by the way, lot easier than scrubbing hands constantly.
Awesome
Awesome
Awesome
Awesome
Awesome
Looking like progress!
TK
TK
- Thread starter
- #354
Thanks fellas! I'm really feeling like I hit another milestone in the project. Having the 1/4's welded in, straight, and covered in primer sure feels good!
Anticipation
Awesome , and I bet you are just chomping at the bit to get er done!
That's Usually when I do something stupid: so take a deep breath and finish with all your fingers toes lungs etc.
Great build inspirational to us all.
Awesome , and I bet you are just chomping at the bit to get er done!
That's Usually when I do something stupid: so take a deep breath and finish with all your fingers toes lungs etc.
Great build inspirational to us all.
Looking fantastic, getting closer to paint. I would just stare at it in awe of the accomplishment. Unbelievable the amount of work you have put into this rig.
Last edited:
- Thread starter
- #357
Thanks guys, it definitely feels good to be in the first coats of primer.
I started block sanding last night with 180. Finished 2 doors & half of the roof (sorry, no pics). After the first round of block sanding is complete I will spray another coat of 2k and then block sand again with 400/600. I'll try to snap some photos next time I am in the shop. Brandon
I started block sanding last night with 180. Finished 2 doors & half of the roof (sorry, no pics). After the first round of block sanding is complete I will spray another coat of 2k and then block sand again with 400/600. I'll try to snap some photos next time I am in the shop. Brandon
Blah..blah..blah..blah...
Quit stalling!!
Quit stalling!!
- Thread starter
- #359
Blah..blah..blah..blah...
Quit stalling!!
Stalling? What are you talking about? Because of that post, NO PICTURES for the next 3 weeks.
I'm just trying to report the progress.
... 
You know I'm just jealous.
How fine are you planning to block it as far as primer/sealer coat?[Edit]Can't find/remember the reply.. You're gonna epoxy the door and pannel inners and innner lowers at this point also to keep the rust points good??
