ARCHIVE 80 Series - Did you know? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Did you know that when the 80 changed from the FJ80 to the FZJ80 many customers asked "What's a ZJ?" to which Toyota replied "If you have to ask, you can't afford it."
i have never laughed so hard reading on mud. beer fest is awsome
 
Toyota makes some really nice screwdrivers

IMG_2426.JPG
 
I like where you're going with this. Thanks for all the work you put into this project and sharing with the rest of us.
 
Toyota makes some really nice screwdrivers

View attachment 1092966
The first two look like re-badged Vessel screwdrivers. I haven't looked into their micro drivers so the third might be as well.

Why did they go with the 930 series for the JIS driver and the 900 series for the flat? Personally, I am more likely to hit a flat screwdriver with a hammer than a JIS. Unless the JIS was an impact type which that one isn't (980 series). Can you tell I have been looking for some of these recently? :)
 
The first two look like re-badged Vessel screwdrivers. I haven't looked into their micro drivers so the third might be as well.

Why did they go with the 930 series for the JIS driver and the 900 series for the flat? Personally, I am more likely to hit a flat screwdriver with a hammer than a JIS. Unless the JIS was an impact type which that one isn't (980 series). Can you tell I have been looking for some of these recently? :)

The Toyota drivers looks exactly the same as my previously gifted (thanks to my friends again, cool) Vessel drivers

I will add the a US driver works MUCH better with JIS screws then a JIS driver in a US screw.
 
The Toyota drivers looks exactly the same as my previously gifted (thanks to my friends again, cool) Vessel drivers

I will add the a US driver works MUCH better with JIS screws then a JIS driver in a US screw.

I need friends like yours...
 
DYK...this is not a sticky yet!?

Also, DYK JDM 80 series already have the AC dryer tucked up nice and safe behind the headlight, next to the rad and battery. Why it was relocated as a rock target on the NA models remains a mystery....
 
DYK...this is not a sticky yet!?

Also, DYK JDM 80 series already have the AC dryer tucked up nice and safe behind the headlight, next to the rad and battery. Why it was relocated as a rock target on the NA models remains a mystery....

Obviously you haven't been keeping up, nothing I do is is FAQ or sticky worthy :flipoff2:
 
DYK....

That on the JDM 80's anyways, when you signal to turn, the clear lens on the outside of the headlight brightens in the direction you are turning to illuminate off to the side.

(not sure if this was posted already...DYK I didn't feel like reading all 23 pages again :))
 

Users who are viewing this thread

Back
Top Bottom