Do you know where to get a replacement remote?
ARCHIVE 80 Series - Did you know? (1 Viewer)
- Thread starter NLXTACY
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Did you know...
- 80 series front and rear driveshafts are the same from 93-97, as long as you have a viscous coupler and ABS (Credit: CDan, beno)
- A small inverter mounts perfectly in place of the LX center console's CD changer
- Turn signals won't work if the hazard light switch isn't plugged in
- Stock LX suspension is known to produce a side-to-side swaying motion while driving (even when new). This is due to the LX-specific shocks having softer valving. The LX shocks can be replaced with LC shocks or aftermarket to solve this problem.
- Stock LX springs are only different from LC springs in the rear, where the LX uses the same springs as an LC w/o 3rd-row seating
- The LX *does* have the pintle hook mount on the rear bumper, it's just covered by plastic (which you can remove)
- The LX *does not* have the aluminum step plate under the plastic cover on the rear bumper
- 80 series front and rear driveshafts are the same from 93-97, as long as you have a viscous coupler and ABS (Credit: CDan, beno)
- A small inverter mounts perfectly in place of the LX center console's CD changer
- Turn signals won't work if the hazard light switch isn't plugged in
- Stock LX suspension is known to produce a side-to-side swaying motion while driving (even when new). This is due to the LX-specific shocks having softer valving. The LX shocks can be replaced with LC shocks or aftermarket to solve this problem.
- Stock LX springs are only different from LC springs in the rear, where the LX uses the same springs as an LC w/o 3rd-row seating
- The LX *does* have the pintle hook mount on the rear bumper, it's just covered by plastic (which you can remove)
- The LX *does not* have the aluminum step plate under the plastic cover on the rear bumper
Last edited:
No, and I would very much like to know as well, because I need a new one. Even if it's just a grey one that doesn't work so I can swap the internals.
LS1FJ40
SILVER Star
This needs to be in the DYK. Since I don't know and haven't changed mine yet I'll ask the question here. Where do I get the drain plugs with the hex/torx head instead of the low profile nut for my diffs and transfer case? Can someone post a link? Thanks.
Plus, I just don't like this thread being on the fifth page. That's crap!
Plus, I just don't like this thread being on the fifth page. That's crap!
ewillis
SILVER Star
This needs to be in the DYK. Since I don't know and haven't changed mine yet I'll ask the question here. Where do I get the drain plugs with the hex/torx head instead of the low profile nut for my diffs and transfer case? Can someone post a link? Thanks.
Plus, I just don't like this thread being on the fifth page. That's crap!
Ordered mine from @beno
LS1FJ40
SILVER Star
Not sure if you are including this type of stuff but the following thread on power windows is a great example of why Mud is the best site:
https://forum.ih8mud.com/threads/got-slow-windows-heres-the-fix.840926/#post-9607389
https://forum.ih8mud.com/threads/got-slow-windows-heres-the-fix.840926/#post-9607389
Squash
SILVER Star
If you blow a drive flange and all the studs and/or inner axle, clean up as best you can and use whatever is available to keep trail crap out.
Rags, feminine pads, whittle wooden plugs, your tiger striped underwear(think drummer)
Lock up and get home.
Rags, feminine pads, whittle wooden plugs, your tiger striped underwear(think drummer)
Lock up and get home.
Squash
SILVER Star
You can trail weld with batteries...
http://www.lcool.org/technical/80_series/bat_weld/battery_welding.html
http://www.lcool.org/technical/80_series/bat_weld/battery_welding.html
These are the magnetized ones that work in the fill and drain plug. Suspenders and belts. 
LS1FJ40
SILVER Star
Get spares and get some with the magnets. When I got them I bought a lot of spares and its worked out for anyone that has been by my house
Speaking of which, might be time to reorder
Another reason I need to make a trip to LA!
LS1FJ40
SILVER Star
Dyk there is already wiring at the rear of the fj for a third interior overhead light?
Dyk the galley plug leaks?
surfpig
The Anti-Tech
Can you toss some to me as I'm driving by tomorrow afternoon? Around 2-2:30 pm.Get spares and get some with the magnets. When I got them I bought a lot of spares and its worked out for anyone that has been by my house
Speaking of which, might be time to reorder
Thanks.
Similar threads
