WOO!
just waiting on 84970-60090 to show up (special ordered supposedly) from OEM Parts
just waiting on 84970-60090 to show up (special ordered supposedly) from OEM Parts
460-Add Crawl Control (CC) and Multi Terrain Select (MTS) to 2010-2019 models/all trims (1 Viewer)
- Thread starter Acrad
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #322
Interesting thread to follow about adding turn assist and 5 speed crawl to Pre-2013 200 series.
forum.ih8mud.com
Crawl was 3 speed on the pre-'13 LC/LX versus 5 speed like 460 and '13+ LC/LX
[SOLVED] Turn-Assist/MTS troubleshooting
EDIT: solution here ----------------------------------------------------------------------------------------------------------------------------------------------------------- I am working on trying to add MTS/Turn-Assist (OTA) to my 2010 LX. I've swapped the skid-control ECU/master...
forum.ih8mud.com
Crawl was 3 speed on the pre-'13 LC/LX versus 5 speed like 460 and '13+ LC/LX
I got crawl control installed today on my 2010, non-premium so I used the one with the blank switches. ZPC was easy with Techstream and following instructions that have been previously posted. I installed MTS last year. Looking forward to trying it out on my upcoming trip to Moab.
OEM parts still hasn't shipped my switch module, which is bad news, but the good news is i needed to bring my '11 in on the Taketa airbag recall, and the service department agreed to swap out the MTS computer for me while they had the dash apart, so i don't even have to do the work.
- Thread starter
- #325
That is pretty cool they were willing to install for you. How did that discussion go down?
I just said they'd be right next to it and asked if they'd change it out. he said bring it by
- Thread starter
- #327
I was chatting with Matt@OEM today about the orders and he said Japan inventory on these parts ran dry a month ago and now the North America Toyota/Lexus parts chain is starting to tighten up as well with dealerships beginning to struggle getting these parts. Availability may be sparse for a while or longer.
Last edited:
I ordered my module back in mid-January and it took about a week before it shipped out.
I got my MTS module from www.discountpartsmonster.com and they look to still have them in stock
Those aren't so rare. The rare part is the switch for CC
nwfl4runner
GOLD Star
Hey all - Figured I would post here as well. I'm the idiot trying to retrofit this stuff into a 2010 LX. Am I right that the new 2020/21 MTS/CC in the GX is now part of the skid ECU instead of the individual drive assist ecu?
- Thread starter
- #334
It is leaning that way as that is what wiring diagrams show.
It would require a re-pin of skid control ECU and additional wiring to test on the '20+ models.
It would require a re-pin of skid control ECU and additional wiring to test on the '20+ models.
This weekend is gonna be fun!
rex in bama
SILVER Star
Interested in seeing how it goes - have also ordered the 090 switch.
I'll post here when done.
What a great write up...this is why I love this site. Of all the social media and crap on the internet, this GX section of IH8MUD (and ordering from Amazon...and wine) is helping me cope with Covid.
Anyway, I am hoping to add MTS and Crawl to my 2017 Luxury (with the airbags removed and lifted). Coincidently I am trying to find a good place to mount my switches for fogs and off road lights. So I am wondering, if I install the MTS and Crawl, it looks like it replaces my 4Hi/Lo and DAC switch, but does the unneeded height adjust and sport/comfort switch just go away and a blank go in?
I'm wondering if I can cover the blank area with a wood piece to mount either a ram mount type arm for my ham radio, phone or some switches. Also I am a little confused after reading through the thread and wanted to double check what the part number is for my 2017 for the MTS/Crawl modules (and if I need to do the paperclip method).
Anyway, I am hoping to add MTS and Crawl to my 2017 Luxury (with the airbags removed and lifted). Coincidently I am trying to find a good place to mount my switches for fogs and off road lights. So I am wondering, if I install the MTS and Crawl, it looks like it replaces my 4Hi/Lo and DAC switch, but does the unneeded height adjust and sport/comfort switch just go away and a blank go in?
I'm wondering if I can cover the blank area with a wood piece to mount either a ram mount type arm for my ham radio, phone or some switches. Also I am a little confused after reading through the thread and wanted to double check what the part number is for my 2017 for the MTS/Crawl modules (and if I need to do the paperclip method).
Last edited:
I had the same hopes and dreams for the blank spots in the switch assembly but unfortunately there is no real-estate under those blanks because there is a one piece circuit board right under there.
- Thread starter
- #340
•• Internal pictures of switches here
You will want this crawl switch
[Crawl for NON AVS/RAHC models] or AVS/RAHC removed
'10-'19 - 84970-60090
You will want this crawl switch
[Crawl for NON AVS/RAHC models] or AVS/RAHC removed
'10-'19 - 84970-60090
