3D Printing Parts for the 80

[richmondbob]

Any concern about the handle coming off the door when used by little kids?
(also thinking about this so drunk friends can crawl their way into the 80 when I'm the DD )

With the help of a colleague I designed a speaker spacer handle for the rear doors. Bigger speaker and a handle for the lil's to use.
Printed with PETG,
I can print some for people if needed.
Thingiverse Link

3D Printed Rear Door Speaker Spacer with handle

forum.ih8mud.com

 

[cnorm5623]

Any concern about the handle coming off the door when used by little kids?
(also thinking about this so drunk friends can crawl their way into the 80 when I'm the DD )

Well I mounted the spacer to the metal of the door with RivNuts so its pretty secure for kids, it could be through bolted as well with a washer and nut on the back side. I give it the dad safety tug but not sure it will help the drunk guys.

 

[aktundra]

Can anybody confirm whether the passenger grab handle can be installed on LHD NA models ? Seems I recall that there isn’t the underlying structural support inside the dash for left hand drive, or an airbag or something

If it’s feasable, I’d be interested in a 3D printed PS grab handle

 

[thatcabledude]

Can anybody confirm whether the passenger grab handle can be installed on LHD NA models ? Seems I recall that there isn’t the underlying structural support inside the dash for left hand drive, or an airbag or something

If it’s feasable, I’d be interested in a 3D printed PS grab handle

Are you talking about what's commonly called the "oh s***" handle attached to the dash?

 

[HandForged]

Is anyone working on a tilt column cover? I'm sure there are a LOT of folks out there that could use one. I would be one of them.

 

[aktundra]

Are you talking about what's commonly called the "oh s***" handle attached to the dash?

Yes. If I had a nickel for every time I’ve heard:”you have a steering wheel to hang on to” !!!

 

[clx16]

Can anybody confirm whether the passenger grab handle can be installed on LHD NA models ? Seems I recall that there isn’t the underlying structural support inside the dash for left hand drive, or an airbag or something

If it’s feasable, I’d be interested in a 3D printed PS grab handle

Not mine...stolen picture from here.. maybe available in other markets

Toyota Burbuja Vx Mt 4500cc 4x4 - $ 98.000.000

Toyota Burbuja Vx Mt 4500cc 4x4, Carros y Camionetas en Toyota. Mercado Libre Colombia - Donde comprar y vender de todo

carro.mercadolibre.com.co

 

[richmondbob]

@thatcabledude you're drunk, tell me where you are so I can pick you up and remind you "oh s***" handles are found on Jeeps, not 80's. (unless you're rocking a Japanese import, then I take it all back)

Are you talking about what's commonly called the "oh s***" handle attached to the dash?

 

[Outsane]

Is anyone working on a tilt column cover? I'm sure there are a LOT of folks out there that could use one. I would be one of them.

@NLXTACY has one in the works... not 3d printed though

 

[HandForged]

@NLXTACY has one in the works... not 3d printed though

What's it made from? I know there are a good many looking for them.

 

[thatcabledude]

@thatcabledude you're drunk, tell me where you are so I can pick you up and remind you "oh s***" handles are found on Jeeps, not 80's. (unless you're rocking a Japanese import, then I take it all back)

Lol... mine has one

@aktundra . The necessary stuff is behind the dash to install the handle.

 

[NLXTACY]

What's it made from? I know there are a good many looking for them.

aluminum or steel. Haven’t decided yet.

 

[richmondbob]

@thatcabledude, I am a big enough man to acknowledge I was wrong.

One question, though - what year Jeep did you nick that from?

Lol... mine has one

 

[HandForged]

aluminum or steel. Haven’t decided yet.

View attachment 2181979

nice! What's the time frame on them? I am using a 80 steering column in my Project truck. Cover is shot of course.

 

[thatcabledude]

@thatcabledude, I am a big enough man to acknowledge I was wrong.

One question, though - what year Jeep did you nick that from?

It was one of dem Japanese jeeps

 

[Delta VS]

Is anyone working on a tilt column cover? I'm sure there are a LOT of folks out there that could use one. I would be one of them.

What's it made from? I know there are a good many looking for them.

They are still available new, although the @NLXTACY one does look nice

 

[aktundra]

Lol... mine has one

@thatcabledude where did you find yours ?

 

[thatcabledude]

Bought from @landcruiserjunky a long time ago. Maybe he can still get them.

 

[landcruiserjunky]

Bought from @landcruiserjunky a long time ago. Maybe he can still get them.

Yeah, I have one grey/one brown. PM me if interestedl

 

[DannyBFresco]

Got some sweet stuff in here. Sub'd for future SUI (shopping under the influence)