KPH -> MPH 3D Print File (1 Viewer)

[CaponeBRZ]

Hey fellas,
I’ve been lurking for awhile, but this is my first post here. I’ve got a 1993 imported HDJ80. As the dumb American that I am, driving around every day I basically just have to go with the flow of traffic because I have no idea what a Kilometer is… That said from the research I’ve done on older threads, apparently you can 3D print a gauge face to go over the one that’s currently in the truck that shows both KPH and MPH. I’ve been unsuccessful in finding that file. Can anyone point me in the right direction please? Thanks!

 

[Mandrake]

Is the gauge face removable from the rest of the cluster? I see a couple screws there, so I'm guessing yes?

 

[CaponeBRZ]

Is the gauge face removable from the rest of the cluster? I see a couple screws there, so I'm guessing yes?

I honestly haven’t torn into it, but I would assume that it can be removed. This is the thread that I found that seems like the direction that I will need to go..

Thread 'Converting to MPH from KPH speedo face'

Jan 18, 2023

Looking at Lockwood for a faceplate conversion for my 1995 HZJ75 with a basic cluster. This is what I have and following is what i think I need.... anyone have experience with this specific cluster conversion?

Land Cruiser. KMH to MPH Conversion Dial for imported vehicle. Part No. C836 – Lockwood International

lockwoodinternational.co.uk

• woytovich
• Replies: 16
• Forum: 70-Series Tech

 

[Mandrake]

I honestly haven’t torn into it, but I would assume that it can be removed. This is the thread that I found that seems like the direction that I will need to go..

Thread 'Converting to MPH from KPH speedo face'

Jan 18, 2023

Looking at Lockwood for a faceplate conversion for my 1995 HZJ75 with a basic cluster. This is what I have and following is what i think I need.... anyone have experience with this specific cluster conversion?

Land Cruiser. KMH to MPH Conversion Dial for imported vehicle. Part No. C836 – Lockwood International

lockwoodinternational.co.uk

• woytovich
• Replies: 16
• Forum: 70-Series Tech

The scale is off on that Lockwood face. Look at where the km scale lines up compared to yours.

 

[CaponeBRZ]

The scale is off on that Lockwood face. Look at where the km scale lines up compared to yours.

Thanks man, that’s why I’m having such a hard time finding the right one. I need one that goes up to 180kph for it to work I think…

 

[voodu3]

Thread 'Converting to MPH from KPH speedo face'

Jan 18, 2023

Looking at Lockwood for a faceplate conversion for my 1995 HZJ75 with a basic cluster. This is what I have and following is what i think I need.... anyone have experience with this specific cluster conversion?

Land Cruiser. KMH to MPH Conversion Dial for imported vehicle. Part No. C836 – Lockwood International

lockwoodinternational.co.uk

• woytovich
• Replies: 16
• Forum: 70-Series Tech

Looks like the 70 series guys might have what you’re looking for

 

[Outsane]

I can take a look at making this, I think i have a cluster at home.

Clock replacement screen with data (vehicle: Universal Flat bottom, OBD: NON OBD)

solvefunction.com

If you want something to give you the mph, until you get a new face plate.

 

[80t0ylc]

Why not just get and use a GPS instead of messing with your gauge cluster? Unless you have surgeon like skills, there's a high probability of doing damage to your very fragile cluster. A GPS is also more accurate, even when changing tire size. Just the opinion from an old fart who's owned his '94 for 25 yrs and "upgraded" it many times including tire sizes.