200 series exhaust system (2 Viewers)

[Chocolate]

I went in to the local muffler shop and originally wanted to have them delete the rear resonator (low-hanging fruit). Before I left the shop, I had a new Magnaflow 14" 2-to-1 muffler and a resonator delete. Sounds pretty good.

Do you have a video of how this sounds?

 

[dc916cruiser]

Do you have a video of how this sounds?

Ok, created a youtube channel and uploaded the clip. Here is the link:

Let me know if you have any issues viewing it. Thanks!

 

[Milaad]

thats with the aftermarket exhaust and the rear muffler deleted? Sounds great! Any drone issues when driving?

 

[dc916cruiser]

Thanks Milaad. So essentially, the only modifications done to the LC were both the stock muffler and rear resonator were removed. Then, a new Magnaflow muffler was welded into place and a pipe was welded on where the rear resonator used to be. The remaining exhaust piping is all stock. Not a true cat-back exhaust, but more of a muffler replacement and resonator delete. Fine for my needs. I do notice it is significantly louder inside with most of the drone around 1800-2500 rpm. I actually like the sound, although some people may not agree. I would compare it to my old '12 Tundra 5.7 with the MBRP cat-back exhaust. Similar sound and drone.

 

[christianleeboy]

Thanks Milaad. So essentially, the only modifications done to the LC were both the stock muffler and rear resonator were removed. Then, a new Magnaflow muffler was welded into place and a pipe was welded on where the rear resonator used to be. The remaining exhaust piping is all stock. Not a true cat-back exhaust, but more of a muffler replacement and resonator delete. Fine for my needs. I do notice it is significantly louder inside with most of the drone around 1800-2500 rpm. I actually like the sound, although some people may not agree. I would compare it to my old '12 Tundra 5.7 with the MBRP cat-back exhaust. Similar sound and drone.

Love it but can I pass smog in CA with the same setup?

 

[dc916cruiser]

Love it but can I pass smog in CA with the same setup?

I don’t see why you wouldn’t be able to pass ca smog. The emissions components were not changed so there shouldn’t be any difference in output. However, if you have a strict smog guy, they may fail the visual. Not sure, but I’m not worried about it.

 

[christianleeboy]

I don’t see why you wouldn’t be able to pass ca smog. The emissions components were not changed so there shouldn’t be any difference in output. However, if you have a strict smog guy, they may fail the visual. Not sure, but I’m not worried about it.

Ok thanks. That’s what I was hoping to hear. If you don’t mind sharing, how much did your muffler shop charge for all the work?

 

[dc916cruiser]

Ok thanks. That’s what I was hoping to hear. If you don’t mind sharing, how much did your muffler shop charge for all the work?

Don't mind at all, they got me for $300 out the door.

 

[christianleeboy]

Don't mind at all, they got me for $300 out the door.

Nice... Not too bad all~ BTW, thanks for uploading the video of your output setup!

 

[dc916cruiser]

No problem, hope it helped!

 

[dirtydeeds]

DirtyDeedsIndustries.com

there will be an adjustable helmholtz resonator added to this prototype this afternoon. I’ll R&D all day tomorrow.

the drone is very slight and I could probably get away without even running a helmholtz. But I’m trying for perfection

 

[dirtydeeds]

 

[Desert Yeti]

looks good, what's the cost going to be?

 

[dirtydeeds]

looks good, what's the cost going to be?

760-877-4234

 

[Madtiger]

Will It pass state inspection?

 

[ChowChilla]

760-877-4234

I'm in Lake Elsinore and looking for this setup, who do I ask for when I call?

 

[dirtydeeds]

Will It pass state inspection?

Yessir. In all 49 states in the United States. Plus the nation of California.

 

[dirtydeeds]

I'm in Lake Elsinore and looking for this setup, who do I ask for when I call?

Keith

 

[bloc]

Please post video/audio of a drive by, idle from a distance, and preferably in cab.

 

[KLF]

Nice welds. Some of the nicest welds you'll ever see are often on exhausts, which means that nobody will ever see them.