Builds 1995 full resto build

[FMC80]

View attachment 3286813

Cheers

The door cards look outstanding. Did you have these reupholstered?

 

[SNLC]

The door cards look outstanding. Did you have these reupholstered?

Yes, same leather as seats.

Cheers

 

[SNLC]

Skid made for the ARB bumper.

Cheers

 

[Feldrian]

Skid made for the ARB bumper.

View attachment 3287339

Cheers

You prefer a skid over relocating the dryer?

 

[SNLC]

Console

After the interior shop we gutted the interior. We needed to do some things before finalizing the interior. That is done on the top half so reinstalled and working on the bottom half now.

Cheers

 

[SNLC]

High dollar cavity wax. This stuff has no scent and isn’t oily like Fluid Film or others.

I applied it to wheel well seams, rear quarters and around the taillights. I will also apply it to the rear floor crossmembers accessed from below. Lastly, will do inside frame rails with it.

Cheers

 

[SNLC]

You prefer a skid over relocating the dryer?

Depends on the Cruiser and what it is being used for. Every build is different.

Cheers

 

[Feldrian]

High dollar cavity wax. This stuff has no scent and isn’t oily like Fluid Film or others.

View attachment 3296858
View attachment 3296859

I applied it to wheel well seams, rear quarters and around the taillights. I will also apply it to the rear floor crossmembers accessed from below. Lastly, will do inside frame rails with it.

Cheers

Interested to hear how you reliably coat inside the frame rails. Been wondering about exactly this on my rig where there have been welds on the frame that I'm sure cooked the coating of the inside and is now happily rusting.

Nice looking work as always.

 

[SNLC]

Interested to hear how you reliably coat inside the frame rails. Been wondering about exactly this on my rig where there have been welds on the frame that I'm sure cooked the coating of the inside and is now happily rusting.

Nice looking work as always.

Cheers

 

[SNLC]

Also took me six cans to do frame rails and the rear quarters. Don’t breathe this stuff, it’s nasty.

Cheers

 

[SNLC]

Cheers

 

[Feldrian]

Also took me six cans to do frame rails and the rear quarters. Don’t breathe this stuff, it’s nasty.

Cheers

Thanks for the info! Definitely something i need to address.

 

[leonard_nemoy]

Hehe, cavity wax. Make sure you keep that stuff away from the bud light drinkers

 

[SNLC]

Thanks for the info! Definitely something i need to address.

You can use a wand for paint as well. Talk to your local auto paint supply shops.

Cheers

 

[vmiaptetr]

Just found out this build is going to be local to my area. Can't wait to see this thing in person.

 

[ohsix]

Just found out this build is going to be local to my area. Can't wait to see this thing in person.

I believe we share an alma mater as we’re both on the Texags Land Cruiser thread.

I’m in Midland, but moving to Dripping Springs in June.

 

[vmiaptetr]

I believe we share an alma mater as we’re both on the Texags Land Cruiser thread.

I’m in Midland, but moving to Dripping Springs in June.

Correct. What I meant is that I'm hoping to see this rig at a TexAgs Land Cruiser meet up in the future.

 

[SNLC]

Getting there.

Cheers

 

[cruiserdan]

Beauty

 

[brettk]

Getting there.

View attachment 3298570


Cheers

The detail on this thing is immaculate. You’ve even nailed the fuel gauge level

Seriously though, well done.