chassis

Powder coated 1964 August FJ40 OEM frame for sale. Just completed in better than new condition. $3500. Can make a rolling chassis with axles, springs, etc. if easier for additional money. Other parts available if needed.

For sale rolling chassis 2009 212k km. I’m import from Dubai No title 🇺🇸🇺🇸🇺🇸🇺🇸 No engine -transmission -transfer case -harness ecu ( going to 80 series) No rust I’m ask 5500$ Location 92841 garden grove California

Good morning, I have a rolling FJ60 chassis with the shell available for immediate sale. It has wheels, body, axels and differentials. Shell is in good condition and could easily brought back. The frame is solid. Originally I bought this to use the frame on a restoration, but eventually sold...

Hi and thanks in advance. I want to ask if a 1972 FJ 45 chassis will take a 1977 FJ 45 tub with or without modifications?

I’m looking at a SA FJ43 from 1973. I know a bit about 40s but I have next to no info on the differences, other than the longer chassis/wheelbase on a 43. What are some things I should look out for? I’m considering an earlier one, pre-75 bc of the simplicity, all metal doors, and better steel...

Used in good condition A storehouse of information FJ 43,45,55 ect. $35.00 + $10.00 ship to lower 48

Hi all. I'm wondering if any UK guys have fabricated or had someone fabricate the rear passenger side spring and shocker chassis mount. It's been pretty rusty anyway but a road bridge on a single track road snapped underneath me last week and either at the time or being recovered its broken...

Hi. I am installing a Renogy 50A DCDC w/MPPT charge controller to charge my house battery located in the cargo area of my 4runner. The diagram shows that the both the starter battery (charge source), house battery and solar panel all connect to the controller's common ground. Could I...

Looking for the August 1980 Body & Chassis factory service manual that covers 4x and 6x vehicles. See the photo below (ripped from an old eBay ad). Decent shape preferred. No photo copies, original only.

Well I don't venture over into the dodge forums much at all, so this is where I'll dump pictures as I go... 1987 W350 Cab & Chassis. It is a retired California Fish and Game truck that thankfully didn't get the common floor/roof rust. Currently a 360 with Np435/Np205. Plans are sorta simple, I...

Anyone put a Stout body on a 40 chassis?

Hi All, first time poster - thanks for all the wisdom out there! Looking at purchasing a 105 and it has some rust (photos attached) - the main concern is the rust around the left front (passenger) tie-down point (excuse the poor photo angle.) - I've circled in red. Is this a common rust spot...

I've just spent a day flushing about about 1 bucketful of mud out of my new (to me) LC200 which once lived on a farm. I assumed that some part of my car must be missing, since an abundance of holes in the wheel arches make no sense. I've just taken a stroll around a holiday park, looking at...

Homemade tow point at the rear of the HZJ I am thinking about making a rear recovery point on my 1995 HZJ so that I can be pulled free when I get stuck. So it must be strong!!! I have removed the towbar so I was wondering if I could bolt an eye to the middle of the chassis frame where the...

Hello all, Parts pulled from a 2000 Cruiser out of Texas. No road salt exposure hence the lack of rust on the chassis. Will add more photos to follow. Feel free to message or text with questions. 920 990 4048 Thanks, Joe

Hello fine folks .. I've done some digging and can't come up with a good idea of the work involved in getting a RHD 80 Series rolling chassis and slapping a LHD body on it .. I realize body modifications are quite complex and some say more involved than anticipated .. however what about this...

Hi all, I'm based in Indonesia and looking to buy an LX470 (iver here they have the jdm chassis numbers UJZ100-xxxxxxx). A 2000 registered model I'm looking at is UJZ100-0082115. I have seen 1999 models with the numbers -0079xxx and 2000 models with 0120xxx and so I'm thinking that this...

I am new to 45's and have some questions that I feel should be basic knowledge but can't seem to find answers for - I am in the slow process of acquiring things to build a LPB out of parts, I have a late 60's chassis already. I am considering buying one of the Chinese cabs which are 79-84. Will...

Hey all, Picked up a 1988 mini truck, mini dump truck that is. Goal is to make it reliable and use as intended. It was hard for me to find a short wheelbase model and this was the only one I've seen locally. It is a dually, with the fronts being the same rims as the rear (I've seen a lot...

Hello murders, I'm doing all my front axle work next week and I'd like to paint the front axle and shock mounts. Will eventually be painting the whole frame as I move from front to back. Just need to decide on what paint to use. I won't be sanding too much because in generally it's pretty rust...