Builds 1989 Toyota Land Cruiser FJ62 Build (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Before, trash wiring tape from OE 35 year old tape it’s like plastic lost its elasticity…. Decided to swap it for RED WOLF loom tape
 
BEFORE WRAP

IMG_8073.jpeg


IMG_8074.jpeg


IMG_8075.jpeg


IMG_8076.jpeg
 
  • Specification: A set of 10 rolls wire harness cloth tap; Meet your needs; SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide; It is work for your different daily needs in diversified use scenarios
  • Professional Material: It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive; High viscosity, high temperature resistance ( -40 °F - 221 °F ), well seal and excellent flexibility
  • Excellent Performance: The wiring harness tape maintains features high adhesive force, good noise reduction, hand tearable and heat insulation performance, and wear resistance; It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection
  • Widely Application: The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing; It can also sort out home appliance wiring and more
  • Easy to Tear: Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently; No need scissors and other tools; You can decide the length of the wire cloth tape according to you needs

IMG_8078.jpeg


IMG_8079.jpeg


IMG_8080.jpeg


IMG_8081.jpeg
 
Going to tackle the interior dashboard wiring tomorrow 😂 there’s like 500 connections in there Jesus, this took like 2-3 hours alone

IMG_8084.jpeg


IMG_8085.jpeg


IMG_8086.jpeg


IMG_8087.jpeg


IMG_8088.jpeg
 
Question, does anyone know hat this little green relay does? Also one of the brown wires is soldered into a gray and black wire?? Looks weird to me also the black and yellow line is just randomly cut? What is that wire

This comes out of the firewall on the passenger side harness. Is there a wiring diagram somewhere maybe I can go through it

IMG_8099.jpeg


IMG_8100.jpeg


IMG_8101.jpeg
 
That all look amazing. Every time I work with the wiring, I want to do that. Next time it’s apart, I think I’ll invest the time to do it right.
 
I use to be a retard and drive a jeep, but one good thing came out of it, the k&n air filter cabin filter were tiny and I remembered in the back of my mind how pathetic and small they were, well. Fast forward they fit flush and perfect under the fj62 dash, going to weld in small brackets to hold it in place and air tight, you’re ok to use my design since I’m awesome 😂

IMG_8129.jpeg


IMG_8127.jpeg


IMG_8124.jpeg


IMG_8126.jpeg


IMG_8128.jpeg
 
I think that’s a great idea. You could probably just use a high-strength epoxy.
Some simple Z-brackets so it can slide in and out.
 

Users who are viewing this thread

Back
Top Bottom