buckroseau
May I have another!!!
- Thread starter
- #2,161
last 2
Builds 1965 FJ45lv build up/resto thread (2 Viewers)
- Thread starter buckroseau
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
buckroseau
May I have another!!!
- Thread starter
- #2,162
Texican said:Had you rather do Jennifer Anniston, or watch her being done...........
I think a better analogy would be, "watch her being done" or "read about her being done"
Unless of course you want to come up and help, the you could bring the, "do" part back......
;p
buckroseau
May I have another!!!
- Thread starter
- #2,163
AATLAS1X said:
Different than I thought? Not good or bad, just different?
Now I want to see a pic of one installed from the factory, yea I know I'm a pain in the ass.
Shane, you might not have a pic of a factory one intalled, but someone else might
Anyone.........Anyone........Bueller............Bueller.................
Thanks, Matt
Texican
s-Moderator
buckroseau said:I think a better analogy would be, "watch her being done" or "read about her being done"
Unless of course you want to come up and help, the you could bring the, "do" part back......
;p
I've helped as much as I can from Texas.........
If my wife caught me doing either I would be in hot water.......
buckroseau
May I have another!!!
- Thread starter
- #2,165
Texican said:I've helped as much as I can from Texas.........
You definetely have
You still got a little ways to go though, keep it up
Just don't let your wife catch ya reading this thread
buckroseau said:Different than I thought? Not good or bad, just different?
Now I want to see a pic of one installed from the factory, yea I know I'm a pain in the ass.
Shane, you might not have a pic of a factory one intalled, but someone else might
Anyone.........Anyone........Bueller............Bueller.................
Thanks, Matt
Land Pimp should have a set on his. All late 82's and 83's had them. I have a pic of the originals, not installed.........
gday Matt.
hope these are of help
cheers Steve
hope these are of help
cheers Steve
buckroseau
May I have another!!!
- Thread starter
- #2,169
uted said:gday Matt.
hope these are of help
cheers Steve
Steve,
Exactly what I was looking for, I'm sure others will be happy to see them also.
I think I might have to email Shane tomorrow and get a set of those coming
At the very least I want to hold them up on the hood and see how they look and work?Thanks again, Matt
buckroseau
May I have another!!!
- Thread starter
- #2,170
About another 3 hours on the lv tonight. Got home and blocked out the fenders with 220, then shot a couple coats of epoxy primer over the top, good to go for paint on those now.
That didn't take to long so I figured I better do something else, so I jammed the hood. You can see the white on the bottom, also white on the top. I cleared the bottom and around the edges, but not that stripe down the center or around the spray nozzle holes. Just shot a little base in that crack and other areas for wet sanding, make sure the white gets down in there when I start spraying the exterior.
Still plan on spraying that SEM sauce on the bottom of the fenders tomorrow night, hopefully
On another note......My taillamp buckets were bent up pretty good, I made a request a few weeks ago for some parts from a fellow mud member who offered some possible lv parts, and what do ya know.........Treeroot is the sh-t I opened the box and almost cried I was so happy Perfectly straight lv taillamp buckets!! I owe you big time Mike, next time I'm in Denver I owe you a or
I took a pic of your artwork on the back, but not sure if you want me to post a pic of that....funny
Thanks again, Matt
That didn't take to long so I figured I better do something else, so I jammed the hood. You can see the white on the bottom, also white on the top. I cleared the bottom and around the edges, but not that stripe down the center or around the spray nozzle holes. Just shot a little base in that crack and other areas for wet sanding, make sure the white gets down in there when I start spraying the exterior.
Still plan on spraying that SEM sauce on the bottom of the fenders tomorrow night, hopefully
On another note......My taillamp buckets were bent up pretty good, I made a request a few weeks ago for some parts from a fellow mud member who offered some possible lv parts, and what do ya know.........Treeroot is the sh-t
I opened the box and almost cried I was so happy Perfectly straight lv taillamp buckets!! I owe you big time Mike, next time I'm in Denver I owe you a or I took a pic of your artwork on the back, but not sure if you want me to post a pic of that....funny
Thanks again, Matt
buckroseau
May I have another!!!
- Thread starter
- #2,171
more
buckroseau
May I have another!!!
- Thread starter
- #2,172
last 1
cruiser_guy
Out of Africa / North Africa
You even got tail light gaskets!!!
buckroseau
May I have another!!!
- Thread starter
- #2,174
cruiser_guy said:
I'm so happy
treerootCO
Where are my keys?!
No problem Matt I figured you needed them more than I did. Glad I could help out. I wrote that on the back just in case you didn't see the studs. That wouldn't be good if they got sent off to the zinc plater with those broken studs.
Matt has at least half of the gasket needed. I am still working on the gasket that goes between the assembly and the body.
I figured you needed them more than I did. Glad I could help out. I wrote that on the back just in case you didn't see the studs. That wouldn't be good if they got sent off to the zinc plater with those broken studs.Matt has at least half of the gasket needed. I am still working on the gasket that goes between the assembly and the body.
buckroseau
May I have another!!!
- Thread starter
- #2,176
treerootCO said:No problem Matt
Matt has at least half of the gasket needed. I am still working on the gasket that goes between the assembly and the body.
I had to post a pic of your art work
It's the little things in life that make me laugh.........
Thanks again
treerootCO
Where are my keys?!
I thought you would like that.
Wow, I don't know where to start here but it took me half the day to read every post.
Congrats to your wife for all the hours you've spent in your workshop, and not with her. Your a lucky man!!!
I look fwd to seeing the completion of this project.
Fatastic job, I will be following this thread to the end!
Aussie
Congrats to your wife for all the hours you've spent in your workshop, and not with her. Your a lucky man!!!
I look fwd to seeing the completion of this project.
Fatastic job, I will be following this thread to the end!
Aussie
buckroseau
May I have another!!!
- Thread starter
- #2,180
Only a couple hours on the lv tonight. Got home and started masking off the edges of the fenders for that SEM sauce.
Mixed up the remaining stuff I had and let'r rip. Got a solid couple coats on. I'm hoping to be spraying color tomorrow, but there was a couple areas of overspray from that SEM sauce. I probably will have to wet sand those areas out tomorrow if it's dry enough and that might put me into Saturday for color.
Matt
Mixed up the remaining stuff I had and let'r rip. Got a solid couple coats on. I'm hoping to be spraying color tomorrow, but there was a couple areas of overspray from that SEM sauce. I probably will have to wet sand those areas out tomorrow if it's dry enough and that might put me into Saturday for color.
Matt
