wiring harness

  1. hogansgyros

    Radio Wiring Harness Trouble

    Hey Crusier friends - I pulled out an after market CD stereo and Installed a classic Sony cassette deck tonight in my ‘89 Fj62. I saw a spark and think I shorted out the hot constant feed wire (clock quit working and radio didn’t work when connected to the 12 bolt energized hot wire from the...
  2. S

    FJ40 Dash switches / electrical wizardry info needed!!

    Hey all!! My 1966 40 series has been completely toggled out by the previous owner, including lights and wipers. They work, but it is not very nice to look at. I have been searching for info on the headlight switch and the wiper switch for 1966- both are hard to source- definitely not still...
  3. BrownCruiser

    ABS Module Wires Chewed

    Hi Forum, The wires to the ABS controller on our 99 LC were chewed by a rodent trying to get warm. Does anyone have any experience with the wiring harness in this area?
  4. H

    **********2LT-E TO 2LT-II SWAP *********

    Hey y'all, new the those forum here, have had a lot of help over the past couple weeks with my Hilux surf from this forum and I'm loving it. I've reached the point where I've got some questions noone has asked or I've failed to find. So registered a new account n here we go. Got my 1993 surf...
  5. Farkai

    Wanted  1991 Land cruiser Fj80 Full FSM wanted.

    Please let me know if you have a Factory Service Manual that you would sell me. Thanks in advance!
  6. tlovvorn

    Need help identifying this dash light indicator on 1972 FJ40

    My son and I are restoring a 1972 FJ40 and have installed a new wiring harness from Kwik Wire and are in the process of reconnecting everything on the dash. The previous wiring did not have this particular dash light connected and I have been unable to find out exactly what it is by searching...
  7. tlovvorn

    Wiring diagram for Installing new wiring harness in ‘72 FJ40 with Chevy 350?

    I’m restoring a 1972 FJ40 with my son and the old wiring harness was like a rat’s nest with the previous owner taking a lot of short cuts. We put in a new wiring harness from JT Outfitters today and have all of the wires run but unfortunately did not take enough pictures of how the ignition...
  8. RFB

    SOLD  NEW IN PACKAGING 1FZE OEM Engine wiring harness and 2 NEW knock sensors NEW 575.00 shipped

    I bought 2 of these new in OEM packaging with 2 knock sensors( as they will likely break in harness swap) this is brand new, not pulled form another truck. 575.00 for harness and 2 new in package knock sensors shipped CONUS text me ONLY is serious please. Richie 508-718-8253
  9. HTXLX470

    Loose connectors behind headlamp, newb, Barnfind LX

  10. C

    Wanted  New OEM Style Wiring Harness for Early 1965 FJ40 FST

    We are 4 years into a restoration and getting close to wrapping it up. One of the last items I am trying to source is a new OEM style wiring harness. A lot of the aftermarket kits have different connectors than the original trucks. We're trying to complete the restoration is the most original...
  11. Onur

    80 Series Rear Locker Sub-Harness Information

    This is the only remaining complete locker sub-harness for the 80 series from Toyota. This will fit all of the 1993-1997 80 Series trucks. This part is barely still available from Toyota. Also integrates the locker breather tube as well. Hope this information helps folks. It is...
  12. Krondor

    '65 Wiring harness installation help

    Hey guys, I wasn't sure if anyone had an old '65 laying around with the wiring harness installed. I tried to lay mine in and found that most of the wires are too short. So I am doing something wrong. I am really looking for pictures under the dash/ each place where the wiring harness pulls...
  13. CruiserWeight

    For Sale  1997 Chevy TBI + Howell Wiring Harness & ECU

  14. geohaskett

    Any Idea on Wiring Harness Vintage?

    I bought a project rig awhile back along with some extra parts. One of the parts I do not need is what appears to be a fairly complete wiring harness. I was told that it came from a 79. I read on a different post that you can identify the vintage by the white label attached. There is one...
  15. Rusto

    7 PIN trailer connection burnt white ground's inulation way up the harness

    Good morning all, I typically spend my time in the 60/62 section, but now that my wife drives a 2007 Toyota Sequoia Limited, I've been browsing around over here. And now, for my first issue. When hauling back our new pop-up camper from Grand Junction, my 7PIN connecter started smoking like...
  16. K

    Any Icon 4x4 owners willing to post the wiring diagrams?

    Hey guys, I am going to be building a custom wiring harness for my 40. I would like something to reference and work off of if possible, and I'm pretty sure the way Icon wires their vehicles is pretty damn close to what I had in mind. I was wondering if anyone was willing to post the wiring...
  17. alohamade

    For Sale  Painless Wiring Harness P/N 10102 FJ40

    Painless Wiring Harness came with the FJ40 I bought. Not using it. Didn't come with the box. Pictures show what I have. Selling $120 + Shipping Message for any questions
  18. Robbie G

    Years that wiring harness changes for FJ40

    Working on sourcing an extra wiring harness for my 1980 FJ40 so we can replace some of the damaged runs. I've found several used harnesses, but am a bit skeptical buying a harness without knowing the year. I've referenced many of the resources on MUD and am looking for a second opinion as I'm...
  19. brakasha

    Wanted  1996 1FZFE Engine Wire Harness (#82121-60343)

    if anyone has the engine wiring for 96 tlc that is still in decent shape (heat shield not warping/sloughing off, no exposed wires or cuts, etc), please let me know. i don't know how easily this harness can be repaired/spliced/patched, but i only really need the bit that runs under the intake...
  20. Malleus

    Harness repair FSM

    Malleus the Younger joined the ranks of Land Cruiser operators last weekend. The PO's professionally installed sound system has necessitated a major repair of the OEM harness. My terminal OCD led me to break out the FSM, Power Source section (RM1022E). I had to reassemble it because the TIS...
Top Bottom