-
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with
Like.
Cheers -
AlbertoSD reacted to jomelo's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
I need to purchase a radio from Australia. I have been unable to find a single source that would ship overseas and it is apparently not available in the United States. If anyone in Aus could help me out please reach out.
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
Cheers
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
Switchpro controls are going in dash to the left of the steering wheel. Switchpro will control the winch, Baja Designs bumper lights, air compressor and I am drawing a blank atm on the other two items. Seven circuits used in it though out of...
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
Picked up another H152 of @shanko ’s at the local dealership. Cleaned off the OR table for input shaft surgery this weekend.
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
In exciting news, the red wheel is shipping from G turbo. I didn’t expect that for a while.
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
The Cruiser has a matching key set so one key for ignition, doors and both fuel caps. Cheers
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
AC line work, compressor cap is for a Denso John Deer application. Finalizing top mount IC. Custom bumps being made to help with vibrations. They are actually 80-series hood bumps. 😉 EGT probe Little details on our in house made rear...
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
H152 input shaft conversion parts are here. LET’S GOOOOOOOOO!
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
Possibly two. Or three!
-
AlbertoSD reacted to roma042987's post in the thread 40 series 15bf conversion pump question with Like.
Thanks for the insight Alberto. Interesting that this IP would have the TPS sensor however no EGR on the engine. I found these other photos of another 98 model 15bf that has EGR but appeared to come in front of an automatic transmission. Both...
-
Please pm me a quote. I have a recipient ready.
-
AlbertoSD replied to the thread 40 series 15bf conversion pump question.In consulting with some folks that know more about these engines than me, the TPS sensor on top of the IP seem to be an emissions control sensor that alerts EGR of throttle position. My 1HD-FT had that sensor and we deleted both, that sensor and...
-
-
AlbertoSD reacted to CRZR45's post in the thread WDYD What did you do on your 70 series today? with Like.
Swapped out my 16” factory white rims 285’s for some 80 series 315’s and put on 1.5” spidertrax spacers. Moving the axle forward in a week or two but it’s looking good and rides nice.
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
Cheers
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
End of week photo bomb! Cheers
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
Cheers
-
AlbertoSD reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
Factory side steps. Assembly in progress... Shop puppy! 🥰🐕 Cheers
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
Transmission arrived today! One of the last pieces of the puzzle. You know it’s a good day when the parts guy meets you with the transmission already loaded.
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Haha.
Oh hell, wrong truck, wrong build. I wanted to put this into the single cab thread. Ignore.
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
Looks like it would fit right here…clicks together…will explore.
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
Forgot about this one. From what I can gather, the 79 series locker ECU just plugs in to the main harness. It should just be a matter of correctly adapting the 80 locker six pin connector for the 79 wiring harness and I should be able to run...
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
I was able to pick up 48”of .250 wall 2 inch tubing for the front crossmember, as well as the correct front frame gussets.
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
Some days, big moves. Some days, small. New visors with correct hardware. Still satisfying.
-
AlbertoSD reacted to bottombracket's post in the thread Builds HDJ79 build #2: 2022 double cab with FTE with Like.
Over the weekend @AlbertoSD and @Spallet swapped transmissions in one of @Spallet’s trucks using my shop. Today @Fern1109 joined then as we pulled the FTE out of the donor chassis, cleaned up the car barn and got both 79’s inside. Amazing what...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
