location

Hello folks, I recently purchased a 1977 FJ40, it’s currently being lightly restored with the addition of AC, and a few other items, etc. I purchased the Bose, Soundlink Flex Bluetooth speaker, dimensions are: 3.56" H x 7.93" W x 2.06" D (1.300 lb). Thus will serve as both my Bluetooth hands...

I have 2020 GX460 without tow hitch. I couldn't fit the new spare 275/65r18 on to spare location. Any input will be greatly appreciated. TIA!

I just picked up a 2008 GX470 and quickly installed a Grom Vline V2. My goal with mounting it was to not impact any of the usable space like the glove box and to also have easy enough access if I need to mess with it. Looking around Google I didn't see any ideas that I ended up going with and...

I'm in the process of installing seats in my 9/79 FJ40 and I'm using Planted brackets - the seatbelt buckle feels like it's out of place, it's bolted to the inner most rear seat bolt. Is that correct? Can someone post a picture? I did a search and couldn't find anything. Thanks! Here is what...

Hi fellows! I bought HJ61 (year model -88) a couple of weeks ago and I'm very excited! But there are of course a few problems and one of them is that the radio is dead. There's no voltage in radio wiring. Clock and cigarette lighter works fine (same fuse with the radio I guess). I think that...

I sure would appreciate it if someone with a factory original Vader light could tell me the dimensions for locating correctly locating the holes. Thank you.

Hi All, Can anyone tell me where the horn location should be under the hood? Should be a simple find but obviously not so simple for me. I tried the horn fix at the steering wheel with the .22 casing but it did not work. I went to test the fuse and it is fine. Then went to test the horn and...

I have a 1978 FJ40. Where was this located on the vehicle? What does it control?

Hello! Newbie here and asking for a favour. As we are converting our beloved 75 series Troopcarrier we just finished laying out the marine carpet and insulation/ sound dampening. Ofcourse we forgot to mark down where the 4 anchoring bolt points are located and now the search for them unravels...

Hey All, lets have a meet sometime this month. Edit: November 29th, 6:30pm @ 6 mile pub Victoria bc. I want someone else to pick the date/location though! @stevebradford @cruisedeisel @seapotato @cruiserpilot . I know you guys were talking about parts trips, do you mind picking a day where...

Show of hands, if you would be interested in attending a QUARTERLY meeting in the Nashville area. Presumably a weeknight 6:00-8:00, somewhere with beer and food. This is not a firm commitment, just trying to gauge how many potential attendees we could have and a suitable location.

That's it. That's the question. Thanks

Hey there, So, I have been scouring the internet for where to install a block heater on my 98 Prado with the 1KZ-TE engine. I have seen only a couple mentions of anyone doing this. From what I have seen, there is supposedly a 35mm freeze plug port somewhere behind the starter. Can anyone verify...

Its been a while since I’ve had a truck with one on it and I can’t remember if this decal went on the inside of the fuel door diagonally. Can someone please send a pic of the placement on their truck? I have a 1982 SR5. Thanks!

Does anybody know where this brass elbow hose is supposed to go to?

Kind late in the game but will post this anyway. A few folks showed interest in making this months Raleigh meeting at the Pittsboro event. Below is the info: Everyone should go attend the Car Show / Cars and Brews at Red Moose Brewing Company in Pittsboro. Their event is 6-8pm on October 4th...

I’m installing the Red Line GM evap kit on my 79. I hooked everything up but I cannot find the tank line check valve. I expected it to be in the access panel near the filler neck and the vapor chamber - but there’s nothing there. I unbolted it leaned it forward and it’s not behind it either...

I have a 2010 Tundra 4.6L V-8 with Code P2445 which is the Secondary Air Injection Pump Bank1. These airpumps are notorious for going bad and the engine goes into limp mode which restricts power to 50%. Before replacing the pump or bypassing it with a kit I want to check the relay just to be...

Why in the world did they put it toward the driver when the steering wheel has it already? GX has it right in the middle... Other markets are going to get it down on the lower right which while not ideal is better... Best pic I could find... Also some had asked what that blank is and its for...

Yeah, stupid thing to be wasting my time on, but what the hey. Anyone have a picture of the location of the factory 1FZ-FE sticker on the valve cover? Or measurements? I grabbed a sticker and want to put it on right. I don't want to get ribbed like the poor guy in another thread (Builds - 94...