input

I have a basically new H55f and it’s for a 2f I’m looking for a 3b input shaft (and retainer?) so I can adapt it to my 3b.

Backstory- I have owned 3 LXs and a few GX models. The LX history was LX470 I loved. Upgraded to an 08 w180k and sold it with 210k, moved to a 13 LX with 118 on it and moved to the 21 GX with 20k on it CPO. The reason for the GX swap was for the reliability and warranty while driving all over...

Looking to see what’s out there.. coarse spline input shaft required for a 12ht/h55 application.. shipping to Terrace BC Canada.

Have a 81-82 H41 (yes, H41 not H42) from a Ecuadorian HJ45. Needs an input shaft at minimum, pilot tip is roasted, which pretty much makes this a parts transmission. No transfer case or top cover included. $200

I've got a 2008 GX470 with the mark levinson and it has the AUX in. Mine is too spotty to work reliably anymore. It looks like this. Im trying to get it to work or to replace it with something better (that doesn't cost $200 either). Wanted to see if people had solutions to this. My thinking...

I’m driving across country and had the water pump bracket fail and pretty much left me stranded at the local Toyota dealership. They’re charging $1750 for the water pump bracket alone with labor and want $2250 to include the timing belt along with a new drive belt. I know this is grossly...

I would like to read others input on what brand of REAR control arms they used, why, experiences, satisfaction, etc. I see different brands. Most seem to have Johnny Joints. Are these reliable? Or do they squeak if not constantly lubed? I tried searching but didn’t find much. Thank...

Could someone please tell me which wire is the speedo input to the back of the instrument cluster on a HZJ79 (2000 Model). I have changed the diff ratios from 4.3 / 1 to 3.9 / 1 and I would rather not jack up the car and run it in gear to look for variable voltage from one of the pins. Thanks...

Can anyone tell me if the steering gear input shaft is in the correct orientation here? A machine shop rebuilt this gear box a couple of years ago (and I had had a shop install for me) and I am now replacing the ujoints in the intermediate shaft between the firewall and gear box input shaft but...

1985 hj75 troopy, Oz, manual h55f. Not sure if I should post in 60's section as most 70's posts are for newer than what I have. Rebuilding h55f transfer. Have watched both otram and George's videos also referring to toyota manual and amayama schematic. Both Otram's and Georges videos are...

After a few days wheeling last weekend I noticed some transmission fluid leaking out of the weep holes on the input side of the A442F on my '94 HDJ81. I'm guessing it's the input shaft seal (PN 9031142010?) but is there anything else I should plan on replacing while I'm in there? I already...

Looking for a B series Input shaft for an h55f. Anyone? Bueller?

Could someone more knowledgeable comment on what I am seeing here? No lockers, but 5 speed and 1ht-ft engine looks like? Looks like 5sp, 1HT-FT, no lockers. https://portland.craigslist.org/clc/cto/d/portland-1997-toyota-land-cruiser-lc80/7646469949.html# Looks like a scam. Scam 1997 land...